Front camber arms and other suspension stuff

[Polo]

Hi Folks,

 

Wheres the best place to get front camber arms? I have Japspeed rear camber and traction arms but i need some front camber arms also! I see there are loads on ebay but im guessing there all crap?

 

Also the front lower arms, the rear one with the big bush, is there any uprated versions out there? Im planning on fitting a rose type bearing to it, but is there any thing already out there?

 

Rear subframe mounts, i want alloy ones! Again i was going to make some but no point if some one sells them already??

[Neilp]

Pm zmanalex, he has got some made for him at a very reasonable price. He was doing a group buy for the fronts.

[Polo]

Pm zmanalex, he has got some made for him at a very reasonable price. He was doing a group buy for the fronts.

 

 

Camber arms or mounts?

[Neilp]

camber arms, im sure he'll be able to sort out your every need, he also has a 350z race car

[ZMANALEX]

Paul, PM received and replied to mate.

 

I have all that would require except for the rear ally bushings which I think that you would get from Adam at Z1.

 

Cheers for the heads up Neil

 

Alex.

[Neilp]

No probe alex you look after me well

[ZMANALEX]

No probe alex you look after me well

 

I do my best Neil, I do my best

 

How are you and the EBC guy getting on

[dunkster]

Paul, PM received and replied to mate.

 

I have all that would require except for the rear ally bushings which I think that you would get from Adam at Z1.

 

Cheers for the heads up Neil

 

Alex.

 

 

no way!!!!!!

 

He doesnt have everything!!!!!!!

[Neilp]

No probe alex you look after me well

 

I do my best Neil, I do my best

 

How are you and the EBC guy getting on

I wonder what he was going to suggest, you spoke and I've heard nothing since

[Polo]

I cant find the compression arm mounts in your section alex?

 

Also your Camber arms look identical to the Cusco ones but cost more?

[ZMANALEX]

I cant find the compression arm mounts in your section alex?

 

Also your Camber arms look identical to the Cusco ones but cost more?

 

 

Paul,

 

This is the link for the upgraded Compression arm rear bushes.

 

viewtopic.php?f=157&t=43456

 

You have the choice of "Cusco" A arms or the SPC A arms, both in my sub-forum.

 

If you can find Cusco A arms for less than £300.00 then I would appreciate a linky

 

Alex.

[Polo]

I was basing it on your one off price as your short a few on the 10 yet.

 

Ahh them bush's! Im after the solid rose jointed type :S

[ZMANALEX]

I was basing it on your one off price as your short a few on the 10 yet.

 

Ahh them bush's! Im after the solid rose jointed type :S

 

 

Try Adam at Z1

[clarkie34]

Adjustable front camber arms are over £400 whatever the make.

[Polo]

Adjustable front camber arms are over £400 whatever the make.

 

 

z1 sell cusco for less than £400, and Ichiba even less, ebay there under £200. Only expensive ones iv seen are SPL ones.

[clarkie34]

Adjustable front camber arms are over £400 whatever the make.

 

 

z1 sell cusco for less than £400, and Ichiba even less, ebay there under £200. Only expensive ones iv seen are SPL ones.

 

Yeah maybe but plus postage,plus duties then your about the same.Ebay I would not touch with a bargepole.You have a respected trader here who has good knowledge of the zed.

[Vik54]

Adjustable front camber arms are over £400 whatever the make.

 

 

z1 sell cusco for less than £400, and Ichiba even less, ebay there under £200. Only expensive ones iv seen are SPL ones.

 

By the time you get them into the country they won't be for under £400 - and as far as the ebay ones go - well go on take a punt...you get what you pay for remember

[Polo]

The Megana sport ones aint bad, i should know, iv been messing with Nissans for over 6 years now and own my own garage specialising in s13/s14/s15s. Not saying there great but, they aint as bad as some of the others like xspower etc. I.e they wont break if you hit a pot hole. Main reason i started the thread was to see a wider range, most the ones on ebay seem to have a rubber bush in them, im after a rose joint. I think Cusco or Ichiba are the way forword

[clarkie34]

I have the Eibach on mine and not had any probs,but only road use.

[Polo]

I have the Eibach on mine and not had any probs,but only road use.

 

Ichiba differant to Eibach Unless Eibach make camber arms????

 

http://www.z1auto.com/prodmore.asp?mode ... rodid=3993

[ZMANALEX]

I have the Eibach on mine and not had any probs,but only road use.

 

Ichiba differant to Eibach Unless Eibach make camber arms????

 

http://www.z1auto.com/prodmore.asp?mode ... rodid=3993

 

 

Eibach camber arms are actually SPC and by the time you add on shipping, tax, duty and handling charge then the Cusco A arms will cost circa £450.00.

[Polo]

I have the Eibach on mine and not had any probs,but only road use.

 

Ichiba differant to Eibach Unless Eibach make camber arms????

 

http://www.z1auto.com/prodmore.asp?mode ... rodid=3993

 

 

Eibach camber arms are actually SPC and by the time you add on shipping, tax, duty and handling charge then the Cusco A arms will cost circa £450.00.

 

Not if you can dodge the duty

[ZMANALEX]

I have the Eibach on mine and not had any probs,but only road use.

 

Ichiba differant to Eibach Unless Eibach make camber arms????

 

http://www.z1auto.com/prodmore.asp?mode ... rodid=3993

 

 

Eibach camber arms are actually SPC and by the time you add on shipping, tax, duty and handling charge then the Cusco A arms will cost circa £450.00.

 

Not if you can dodge the duty

 

Then it is not a level playing field regarding price comparison if you are omitting the tax and duty.

[Vik54]

Something tells me you can't guarantee that you'll get away with duty/tax - If you knew you could dodge duty/tax then why even look on here - I'd just get ordering from US & Japan

[Neilp]

Something tells me you can't guarantee that you'll get away with duty/tax - If you knew you could dodge duty/tax then why even look on here - I'd just get ordering from US & Japan

+1