showtime1 Posted May 8, 2010 Share Posted May 8, 2010 tried to get the winderscreen wipers off as there in need of a refurb took the plastic blanking plate off 14mm nut off ,cant get the bloody wiper arm off am i doing something wrong as ive really tried, sprayed wd40 on it aswell, help please Quote Link to comment Share on other sites More sharing options...
James B Posted May 8, 2010 Share Posted May 8, 2010 I cant get the rear wiper blade off either, just gave up in the end. Very irratating! Quote Link to comment Share on other sites More sharing options...
ZMANALEX Posted May 8, 2010 Share Posted May 8, 2010 They are on a spline and taper guys and just need to be at the correct angle to get them off. Get the load off them, give them a wiggle and they should just pop off. Alex. Quote Link to comment Share on other sites More sharing options...
Zugara Posted May 8, 2010 Share Posted May 8, 2010 Have you tried a small bearing puller? That will get it off. Quote Link to comment Share on other sites More sharing options...
Carbon Coops Posted May 8, 2010 Share Posted May 8, 2010 wd40 let it soak in a bit little tap with a hammer then a wiggle should free it off Coops Quote Link to comment Share on other sites More sharing options...
showtime1 Posted May 8, 2010 Author Share Posted May 8, 2010 tried the hammer and wd40 still wont budge ill have another go tomorrow Quote Link to comment Share on other sites More sharing options...
Chris`I Posted May 9, 2010 Share Posted May 9, 2010 Just have to keep wiggling it. They can be quite hard to get off the spline if they are tight, as Alex says, you need to get the right angle. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.