jerry3167 Posted December 2, 2009 Share Posted December 2, 2009 Guys, I just had a brand new ECU from Nissan fitted last week, am I right in thinking that they will need my spare Key to re-code that too? I forgot to bring it in when I took the car in!! Jerry Quote Link to comment Share on other sites More sharing options...
R35LEE Posted December 2, 2009 Share Posted December 2, 2009 Yup both keys needed Jerry Quote Link to comment Share on other sites More sharing options...
andyvvc Posted December 2, 2009 Share Posted December 2, 2009 There is a key resync sticky on this forum (i think) - ive used it before when the battery in my main key died. Its pretty easy to do - turn ignition, press buttons on key etc etc. I did it for both keys and sync'd them both up after flat batteries in the fobs. I found i had to do both keys at the same time (there is an option to sync additional keys after doing the first one). When i didnt do this, the resync'd key work, but the old key (that did work) stopped working lol ! EDIT - here ya go viewtopic.php?f=35&t=16004 If this doesnt work - try the 350z US forum. The instructions i used were the official Nissan ones on a Nissan Tech Guide page thingy. Not sure if i found that set of instructions on here or not ? The stuff on the clicky seems right i think Quote Link to comment Share on other sites More sharing options...
R35LEE Posted December 2, 2009 Share Posted December 2, 2009 Just do the manual recode procedure Jerry as andyvvc said. It is on here somewhere do a search Quote Link to comment Share on other sites More sharing options...
jerry3167 Posted December 2, 2009 Author Share Posted December 2, 2009 Cheers Guys, although I may just take it to Nissan, as they need to do it for free! Quote Link to comment Share on other sites More sharing options...
Mark@Abbey m/s Posted December 2, 2009 Share Posted December 2, 2009 Jerry , has it cured the problem you had? Mark Quote Link to comment Share on other sites More sharing options...
jerry3167 Posted December 2, 2009 Author Share Posted December 2, 2009 Hi Mark@Abbey, After rigourous testing and systems check, sensors check, and just about every other check possible, the Zed appears to be fine, no EML touch wood!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.