ug45cwb Posted November 3, 2009 Posted November 3, 2009 Decided to keep my Z for another year or so and give it some bling. As I'm a complete newb I thought the front bumper reflectors would be a safe and gentle way to start. I like the clear OEM ones on z-store. Are these hard to fit? What tools will I need? Cheers Quote
Chilli Red Posted November 3, 2009 Posted November 3, 2009 Decided to keep my Z for another year or so and give it some bling. As I'm a complete newb I thought the front bumper reflectors would be a safe and gentle way to start. I like the clear OEM ones on z-store. Are these hard to fit? What tools will I need?Cheers Not hard to fit, but it is a bumper off job Sarah Quote
JAP350Z Posted November 3, 2009 Posted November 3, 2009 Having taken off the bumper, it's a simple task to take off the wheel arch liners as well. Once the wheel arch liner is off you can change the front indicator bulbs from orange to crown silvered. (See here, but there are other companies - http://www.jdmperformance.co.uk/item_de ... odID=52189) Two quick and easy mod's at the same time. Quote
ug45cwb Posted November 3, 2009 Author Posted November 3, 2009 Not sure about taking the bumper off. I would almost certainly screw the pooch one way or another during the process. What about fitting a rear diffuser? That a bodyshop job? Quote
3FIDDYZ Posted November 3, 2009 Posted November 3, 2009 Depends on which one! Not a bumper off really, more of a wheels off and arch liner removed... easy job really... jack up, wheel off, remove arch liner (1 screw and 4 pop clips) remove oem with a short phillips (2 screws) and defit with the white ones... arch on, wheel back on, stand back, drink tea, smoke fag (delete if irelelvant) admire your work! Where you based? Quote
ug45cwb Posted November 3, 2009 Author Posted November 3, 2009 Based in Birmingham. I have the number for nurrish's uncles body shop i will give them a buzz tomorrow. Anyone used him before? Quote
srobrien Posted November 3, 2009 Posted November 3, 2009 I changed mine without removing the bumper, bit of squeeze though and you need to remove front wheels and arch liners. R Quote
V88 REG Posted November 9, 2009 Posted November 9, 2009 i shall be fitting mine this wknd. Hopefully put pics up as got sum niiice little touches on the car too Quote
jub Posted November 10, 2009 Posted November 10, 2009 Having taken off the bumper, it's a simple task to take off the wheel arch liners as well. Once the wheel arch liner is off you can change the front indicator bulbs from orange to crown silvered. (See here, but there are other companies - http://www.jdmperformance.co.uk/item_de ... odID=52189) Two quick and easy mod's at the same time. Does that mean you'll have access to all the other bulbs too? Quote
Lyger Posted February 4, 2010 Posted February 4, 2010 How did you get around the washer bottle on the drivers side ?? Quote
Dene8 Posted February 5, 2010 Posted February 5, 2010 I changed mine without removing the bumper, bit of squeeze though and you need to remove front wheels and arch liners. R I managed to leave my wheels on but the liners had to be part removed Only took 5mins or so per side.......... Never had a car where changing the bulbs was so much of a pain!! Quote
Neutreus Posted February 5, 2010 Posted February 5, 2010 Hmmm, perhaps I did it the long way round. I took the bumper off completely to do this. Took about an hour but kinda felt like I should have done more than just change the reflectors after all that effort, but it looks much better now Quote
jerry3167 Posted February 7, 2010 Posted February 7, 2010 Mine were done without removing the bumper Quote
marzman Posted February 7, 2010 Posted February 7, 2010 Mine were done without removing the bumper But do you have any knuckles left? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.