Sandy Posted March 5, 2009 Posted March 5, 2009 Hello Folks, I'm thinking about upgrading my brakes on my 2003 Zed (JDM) to the brembo's that come on the UK model. What will I need?? Thanks in advance for any advice Sandy Quote
MITZ@CougarStore Posted March 5, 2009 Posted March 5, 2009 As you need the full kit, speak to ZMANALEX, he can supply everything that you need… Quote
Chris`I Posted March 5, 2009 Posted March 5, 2009 As you need the full kit, speak to ZMANALEX, he can supply everything that you need… +1 - Alex will be able to supply everything you require and also give you guidance of how to fit it all Quote
Sandy Posted March 5, 2009 Author Posted March 5, 2009 Hee hee thats where I plan to get the calipers if I go ahead with the upgrade Quote
dcash5 Posted March 5, 2009 Posted March 5, 2009 I did this.... You will need 4 Brembo Calipers 4 Brembo Discs 8 Brembo Pads (4 Front 4 Rear) 4 rear Caliper bolts Hoses (Depends on style) >Oem Solution you will need - 4 small hardlines ( Again 2 front 2 rear) 8 Flex hoses (either braided or Rubber) >Hose Solution Hel set Single set of Brembo Lines And some brake fluid (probs about 1.5ltrs to allow for spillage) Quote
Chris`I Posted March 5, 2009 Posted March 5, 2009 I suggest you get the HEL braided lines as Dan points out above. Makes installation a lot easier, only 4 lines stright to the callipers, rather than a mixture of hard and soft lines Ask Alex how to remove the lines without spilling the fluid too, it will make bleeding them a lot easier than if you let the fluid drain too much. Quote
sub zero Posted March 5, 2009 Posted March 5, 2009 great post.....i am really wanting to do this as well as the oem brakes have been struggling to do their job for the past year dcash----how much did you end up paying for the parts? Quote
Stew Posted March 5, 2009 Posted March 5, 2009 Here's the man to ask for calipers http://www.350z-uk.com/forum/viewtopic.php?t=19537&highlight=brembo Quote
sub zero Posted March 5, 2009 Posted March 5, 2009 i just pmed him....hopefully it doesnt cost a arm and leg ^_^ Quote
ZMANALEX Posted March 5, 2009 Posted March 5, 2009 i just pmed him....hopefully it doesnt cost a arm and leg ^_^ pm replied two. Quote
ZMANALEX Posted March 5, 2009 Posted March 5, 2009 i just pmed him....hopefully it doesnt cost a arm and leg ^_^ pm replied to. Quote
dcash5 Posted March 6, 2009 Posted March 6, 2009 Well personally I would only do this when your brake discs and pads need changing to make this a logical cost! But rough ideas Calipers - £400 Brake Discs - OEM style from BrakesINT - £300 Brake Pads - DS2500 from ESR - £120 Brake Lines - £65 from Hose Solutions Brake Fluid - £15 Quote
ZMANALEX Posted March 6, 2009 Posted March 6, 2009 Well personally I would only do this when your brake discs and pads need changing to make this a logical cost! But rough ideas Calipers - £400 Brake Discs - OEM style from BrakesINT - £300 Brake Pads - DS2500 from ESR - £120 Brake Lines - £65 from Hose Solutions Brake Fluid - £15 Dan, I'll have a dozen sets of DS2500 at those prices mate and when you are at it send me over some calipers as well Must be a secret sale on some where Quote
dcash5 Posted March 6, 2009 Posted March 6, 2009 If I could get multiple sets I would. Unfortuately I got them as part of the ESR Clearance Sale. Brembos were off a trashed 53 zed that Andy and I have pretty much Stripped! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.