Speedometer + ALL dials/computer displays stop working

[Vertakill]

This has happened me more and more often lately, and usually rectified within a couple seconds of it happening. However, after going over a biggish pothole, the display/speedo stopped working for at least 30 mins. It eventually came back, only for it to stop working again a little while later.

 

This is every dial on your display directly in front of you - fuel, speedo, rpm etc.

Also, the smaller LED displays on your left - batt voltage, oil, multi-function dial.

 

Any ideas what I can do? Could it just be a cable that powers the entire display, and where should I be looking?

It's quite difficult to physically get your head around that area as theres not much space for your head between the steering wheel/windscreen.

 

Any help is much appreciated, as the main one that's worrying me is the lack of being able to see the fuel gauge and the MPG is naturally fairly woeful.

[Ian]

It is powered by a single cable. I think its behind the 3 gauges but not 100% sure.

[Vertakill]

I had a look behind the speedo and saw 2 cables, left and right. Both seemed fine.

 

I'll try take the whole speedo off when I have a chance and have a better look.

 

Cheers Ian.

[Sarnie]

Did you end up with that zed in Stafford?

[Madmarky]

When i installed the my stereo i disconnected the battery. Upon reconnecting it none of my dials stopped working just like yours. I thought i hadnt connected something up correctly but left it for a bit and they started working again. I know this does not really help you but i think it takes time to reset itself somehow so maybe you have a loose wire. Hope ya find out the problem as i can imagine how annouying it is.