cearnshaw85 Posted February 6, 2016 Posted February 6, 2016 Hi all Please can someone supply me with a crank sensor part number for an automatic gearbox. I can't seem to find a number anywhere Quote
ZMANALEX Posted February 6, 2016 Posted February 6, 2016 Just go to your Nissan dealership with your reg number or vin number and they will sort you out. Quote
ZMANALEX Posted February 6, 2016 Posted February 6, 2016 http://nissan4u.com/parts/350z/us_z33/2004_2/type_1/engine_electrical/distributor/illustration_1/ Quote
Adrian@TORQEN Posted February 6, 2016 Posted February 6, 2016 I think both auto and manual are the same, let me check. Have a look here for now: http://www.torqen.uk/search?controller=search&orderby=position&orderway=desc&search_query=23731&submit_search= Quote
Adrian@TORQEN Posted February 6, 2016 Posted February 6, 2016 No 10 in the drawing below, part no: 23731-AL60C Quote
Mark@Abbey m/s Posted February 6, 2016 Posted February 6, 2016 Part number for a JDM car is 23710-AL605 which crosses over to AL606 or you can use alternative number WL01A. But to be 100% sure PM me your chassis number and model number as I think the Auto has a slight different sump and the sensor length is different. Thanks Quote
cearnshaw85 Posted February 6, 2016 Author Posted February 6, 2016 Thanks guys sorry for the late reply been fitting a kitchen. The new engine supplied to me I've found out was from an auto (I have a manual) so I can't phone Nissan as I have no reg that matches. I have no chassis number either. Will I be ok using these part numbers. Thanks in advance. Quote
cearnshaw85 Posted February 6, 2016 Author Posted February 6, 2016 The sensor length is different mark. Quote
ZMANALEX Posted February 6, 2016 Posted February 6, 2016 As per my post above, this is for an Auto. http://nissan4u.com/...illustration_1/ Quote
Adrian@TORQEN Posted February 6, 2016 Posted February 6, 2016 Alex, this shows different part no: http://parts.johnleenissan.com/p/Nissan_2005_350Z-35L-V6-Automatic/CRANKSHAFT-POSITION-SENSOR-Crnkshft-sensor-Engine-Crankshaft-Position-Sensor/49552070/23731AL60C.html Says 5 AT as well. Quote
ZMANALEX Posted February 6, 2016 Posted February 6, 2016 The auto CPS is different from the 6 speed manual. Quote
Mark@Abbey m/s Posted February 6, 2016 Posted February 6, 2016 The numbers I quoted tie in with Alex part numbers as well. Quote
Adrian@TORQEN Posted February 7, 2016 Posted February 7, 2016 The auto CPS is different from the 6 speed manual. The link I've posted is for Auto, not manual I'll ask Nissan USA, maybe the USDM part is different from JDM part. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.