Jump to content

Recommended Posts

Posted

anyone come across this before

 

on locking the car, the drivers window drops half way

 

is this a battery issue or is there a reset process like there is for the 350

Posted

To do the window reset, start the car, push the window open button until the window opens fully and keep holding it down for 5 seconds. Then pull it up to fully close the window, again holding it up for 5 seconds once closed.

 

Or try this

 

ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL : Special

Repair Requirement INFOID:0000000004460995

 

INITIALIZATION PROCEDURE

 

1. Disconnect battery negative terminal or power window switch connector. Reconnect it after a minute or

more.

2. Door switch is OFF (close).

3. Turn ignition switch ON.

4. Operate power window switch to fully open the window. (This operation is unnecessary if the window is

already fully open.)

5. Continue pulling the power window switch AUTO-UP. Even after glass stops at the fully closed position,

keep pulling the switch for 3 seconds or more.

6. Initializing procedure is completed.

 

There you go. :)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...