wanting bulbs to complement the blue from the Zenons!!!!

[shire350Z]

got silver side repeater buls and indicator bulbs but dont know what side light or full beam bulbs to get!!! what have ppl bought in past blue or white and from where?

plus what about interior light?

 

cheers!!!

[GIXXERUK]

ebay - leds for the sidelights - white (blue are chavvy imo ) white leds do give off a blue tint

 

i bought the 501 / W5W - White 4 LED for the sidelights and rear number plate lights

 

http://cgi.ebay.co.uk/12V-2Pcs-4-LED-Xe ... dZViewItem

 

-----------------------------------------

 

 

 

iirc the ,main beam bulbs are H7 , i put a thread on here asking what people had fitted as they look yellow next to the xenon and............no one replied

 

the best are piaa but they are about £40+ a set !!

 

had them before and work really well

---------------------------------------

interior - i got these leds , you need two

 

http://cgi.ebay.co.uk/Car-9-LED-Interio ... dZViewItem

 

----------------------------------

 

i changed the front and rear indicators to chrome

 

just so you know what to buy not suggesting you use them same buyers although i had no probs with them

[shire350Z]

cheers buddy for taking the time doing all that so did you change the main beam bulbs in end??? how easy is it to get to rear indicator bulbs my sidelight bulbs are being a right git to get off normally u slide them towards the front of the car or back dont you? but mine wont come away u had better look?

 

u changed interior light to?

[Chris`I]

What bulb is in the boot as well? I fancy uprating mine now I have LEDs in the interior lights

[M13KYF]

cheers buddy for taking the time doing all that so did you change the main beam bulbs in end??? how easy is it to get to rear indicator bulbs my sidelight bulbs are being a right git to get off normally u slide them towards the front of the car or back dont you? but mine wont come away u had better look?

 

u changed interior light to?

 

rear indicator bulbs can be accessed apparently by removing the rear brake light. One removed, you will see a access whole. Takes 5 mins to remove the rear brake light.

[GIXXERUK]

cheers buddy for taking the time doing all that so did you change the main beam bulbs in end??? how easy is it to get to rear indicator bulbs my sidelight bulbs are being a right git to get off normally u slide them towards the front of the car or back dont you? but mine wont come away u had better look?

 

u changed interior light to?

 

as mike says remove the brake light and you can get your hand down to do the rear indicators (cleans the rear up without the orange bulbs)

 

the front sidelights just turn and pull out - came out easy (pain to get to tho), you are on about the front sidelights ? not the side indicators ?

 

i changed the interior lights, number plate lights and sidelights to led, the front and rear indicators to chrome bulbs

 

i havent done the main beam yet - i should have done them when i changed the front reflectors realy ! doh !

 

hth

 

paul

[GIXXERUK]

the phillips bulbs always get good reviews

 

http://www.powerbulbs.com/product_list. ... =37&cat2=9

 

might try some for the main beam

[shire350Z]

no i ment the side repeaters bulbs!!!

[GIXXERUK]

the ones on the wing come off really easy, i take mine out when i polish, as you say push them towards the front or push to the rear and then they pull out

[shire350Z]

hmmmmm unsure wether to get white or blue sidelight mates got blue on evo and look well!!!

[GIXXERUK]

i got white but leds do have a natural blue tint, they are only cheap so buy both

 

the leds in the rear number plate light look , these are just push the holder to the side and pull off - 5 min job

[N15MNO-Daron]

Whats the best way to get to the front side lights?.. i cant seem to get to them.

[GIXXERUK]

Whats the best way to get to the front side lights?.. i cant seem to get to them.

 

turn the wheel all the way inwards on the side you are doing, then undo a screw/bolt on the inner wing plastic guard (level with the headlight) and pull it down, you can now get your hand in behind the headlight, turn the bulb holder and it will come out, you can then pull the holder and bulb through the gap and change the bulb

 

check it works before you put it back

[N15MNO-Daron]

Thats a big help..cheers! Some other guys on here mentioned that i had to take wheels off completely

[shire350Z]

lol more fool him mind good excuse to get wheels off and give them a good clean

[GIXXERUK]

Thats a big help..cheers! Some other guys on here mentioned that i had to take wheels off completely

 

no you dont have to mate, done it a few times without

[askmenice]

Be careful replacing the rear indicators make sure the new bulbs are seated properly before putting them back in or the bulb can end up in the lens and it aint easy to get out.

[shire350Z]

good tip

[GIXXERUK]

same goes for all the bulbs if you drop one in the headlight you will have to take the bumper off to get the headlight out

 

and it has happened before to someone on here

[shire350Z]

how do u get to the interior lights???

 

my Z never came with a workshop manual so dont wanna go breaking anything!!! any1 know where i could get one from ill try dealer monday but doubt they can mine being a 53plate cheers

 

other thing is the boot bulb same as front then i can order three at once if not which is the one to go for to match the white LED's in front

[GIXXERUK]

download a manual here http://www.350z-tech.com/zwiki/Service

 

the boot bulb is different to the front

 

the interior lights plastic cover is just clipped in, you just use a flat head screw diver or a kitchen knife down the side to wedge it out

[shire350Z]

wedge front which side?? inside of both lights with a guess???

 

cheers for link!!!

 

plus do u know which bulb to get for the boot then to match the front??

[GIXXERUK]

put the knife up the front or rear side and it will push the lug out of the hole and will come out

 

the boot ? i cant remember to be honest but the cover is just a push fit aswell, you can just put a kitchen knife down the edge (left side as it slides slightly) and wedge it out its all very technical

[GIXXERUK]

ahh... if iirc the boot light is the same as your indicator bulb on the wing

 

hth

[shire350Z]

hmmmmm so struggle with a white LED for there then