Eddy9592 Posted July 23, 2015 Share Posted July 23, 2015 (edited) the connectors don't fit I've taken the adapter off the wire that's connected to the car and tried to plug it into the new led lights socket but the plug is almost flipped opposite and it's black plastic all the guides it's white/cream, shall I just trim off the mismatched parts? Edited July 23, 2015 by Eddy9592 Quote Link to comment Share on other sites More sharing options...
veilside z Posted July 23, 2015 Share Posted July 23, 2015 It should be plug n play. You can hard wire it just strip back the plugs and solder the wires together. Don't forget to tape the bare wires. :) Quote Link to comment Share on other sites More sharing options...
Ewen@Clark Motorsport Posted July 23, 2015 Share Posted July 23, 2015 What age is your Zed? I have seen this once with an early import you can trim the bits of plastic like you mention and they will connect. Quote Link to comment Share on other sites More sharing options...
Eddy9592 Posted July 23, 2015 Author Share Posted July 23, 2015 It's 2005 gt4 I've done it though thanks guys, just filed the plastic bits down and fit perfectly such an improvement over the preface lift 1 Quote Link to comment Share on other sites More sharing options...
Stutopia Posted July 23, 2015 Share Posted July 23, 2015 I had to do some filing to make mine fit too. They've not come loose in 2 and a bit years Quote Link to comment Share on other sites More sharing options...
Eddy9592 Posted July 23, 2015 Author Share Posted July 23, 2015 Well that's good some piece of mind onto the next problem now creaking suspension woo Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.