-
Posts
14,449 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by ZMANALEX
-
-
If you prefer to replace parts as a process of elimination instead of performing proper diagnoses then the air con module would be a good place to start, followed perhaps by the IPDM and the BCM both these parts control the issues that you are having.
I should have all these parts in stock.
What year and model is your 350?
-
Yes, the aircon module or the ribbon have been known to be problematic and should be also checked out.
-
The IPDM is behind the battery.
-
3 minutes ago, Gavin911 said:
OK mate, I will check all the fuses in the fuse box in the engine bay.
Don't forget about the fuse box and relays within the IPDM.
-
Try checking the other fuses and relays in the other fuse boxes.
- 1
-
8 minutes ago, Paul K said:
Just wondering if an ECU reset may help
You have nothing to lose Paul, that is what I would try first.
-
Paul,
Perhaps water ingress to the ecu or perhaps the bcm is acting up?
-
Tyres first and then the techy options:
- 1
-
I would be looking at the tyre set up.
Try swooping them around and see if the fault follows
- 1
-
Just back off the throttle a bit as you are unsettling the car.
You can still carry good speed in and out of the corners when driven aggressively but sensibly and smoothly.
Or if you want to get techy just turn the stuff off that affects this.
Switching off the EPS is not the answer as it does not completely switch off 100%, but is usually enough for most people.
-
1 hour ago, Monkey1983 said:
Oem , pre owned
1 x pair 350Z OEM cats are in stock at the minute off a 39,000 mile HR.
£850.00 shipped to your door (UK Mainland only)
Drop me a PM if you want them.
-
OEM or aftermarket sport cats?
New or preowned?
-
I spoke with the boss man Damian, at L & G today and they are on the case.
They accept that there is an issue with the brakes and are collecting the car on Monday once Dave Greenwood returns from holiday, and they very much appreciate the opportunity to put this unfortunate situation right.
- 3
-
Quoting Sizes, PCD, and Offsets may help with your sale.
-
23731m is not a part number.
Just give the Nissan dealership your car reg number and ask for a camshaft position sensor Bank 1 (driver's side)
Best not to complicate matters by attempting to provide a part number to the dealership as your track record on numbers is not too clever.
- 1
- 1
-
Good job that I asked then.
For OEM best to just get from your local Nissan dealership.
Do not be tempted by aftermarket for this one.
From your schematic the Bank 1 sensor is on the back of the head and not the top.
-
Of course, no problem.
Please confirm if it is DTC P030 or P0030
Also, is your car a UK model or an imported JDM because the sensors are different?
I will grab the sensor when over at the shop tomorrow and send you a PM with the payment and shipping details.
-
DTC P0030 suggests Bank 1 Sensor 1.
This sensor is fitted to the the exhaust manifold.
I have these in stock and they are genuine OEM and are good to go same/next day.
The schematic that you posted up is showing the cam position sensors.
-
What year and model is your car?
What DTC are you getting?
-
Happy days Matty and welcome back:
- 1
-
-
-
Unsure, I will compare both tomorrow for you.
-
6 minutes ago, Andymac183 said:
Black - But I'll spray it if the colour isn;t right. Does not retract, just flips up!
The only flip-up lid that I have has the release button missing I am afraid.
FREE Nismo N1 front bumper and other stuff
in 350z Parts For Sale
Posted
What parts do you actually require?