type g

Hi i have 63.5mm o/d 1.5mm wall stainless steel tube in stock, if you want some PM me an address & i can ship tonight. all FOC

Hey B16REE, If you want a dremmel-free alternative see below: Firstly this is the light i am working with: you will need to chop the wires on the rear of the light after the connector (see below): following that, change the light (shown disconnected) to a red bulb and connect the wires from the bulb to the ones powering your existing foglight. Failing that you could buy a UK cluster with bulbs (from Nissan for approx £60) and do exactly the same! (which is what i've done)

I think this car was on ebay nov 29 2008 possible seller was tammy not tommy http://myworld.ebay.co.uk/tammy_xx title of the post was (Is this ad for real ) no pics

Thanks guys for reminding me of that day, paint and match was by far the easy bit, all you need is the paint code L40 and any spray shop can mix it matching is down to the sprayer/bodyshop skill. for pro advice you may phone paul coombs of THAME crash repair centre they did the repair & will remember it well. 01844 212798 good luck with your purchase ps zeds look good in all colours.

Thanks everyone for a fantastic weekend is this the pic you want James?:

Nice one mike how much is a oneway ticket for the wife.

Hi martin as this is close by, we will be there on Saturday 9th Look forward to seeing you then Rick

Hi nick good spot yes it was the love of my life, being driven to or from work by the wife. : hi stew Interlagos Fire yes with karen at wheel we hope to make the hoon this year with the zed this time!

That colour is far too common... must do more mods, good to see us interlagos fire owners are so good looking

*ALSO* there is a hairline crack in one of my arch mouldings/extensions so the bodyshop are trying to source one from the US as they are available for the latest US Nisimo version. if they are successful then i'll get the details for you guys

Code is L40 mate i've still got 1L if you want to try your more than welcome. (may need watering down) plastic mouldings, approx 1.5-2mm thick. rivited & glued to wings pics below also sarnie they are fitted by the dealer the full type G kit consists of: 1, Flared wheel arches 2, Rare Rays 3, Special colour interior The car is supplied as a standard ST JDM = GT UK version. without cruise, to the dealer. and they fit the above parts to make it into the type G. Hi Greg - ordering paint from there sounds a bit expensive, the paint is available from Morelli's UK @ £37.94 per litre Pics hope that helps, Ricky

Thanks for comments, good to be back! hopefully up for a weekend in Bala next year & a week in Scotland, time and funds permitting. thanks again, Ricky

"The Fairlady Z version ST type G features are 19-inches rear tires (F 245-40R18, R 265-35R19), front & rear fender moldings (+25mm), RAYS alloy wheels, and exclusive interior leather color. " Big Phil has priced these for someone else before (they are VERY expensive) This is one of the reasons for the delay as a special tinter was required, but the match is excellent - well worth the wait

For those of you that didn't get to see the G at the Hoon & had to put up with us in the Civic, this is the damage that happened on the way. Which unfortunately meant the car was out of action for a little while Picked up on friday, after a long time waiting and a few modifications the Z is back Extras are: Nismo Style V2 Spoiler Clear front reflectors Z badges Hope you like it! Ricky

Hi guys, had a great weekend (after such a sh1t start!) thanks to Stew Jayne and the rest of the team for a great drive and barbeque. On the subject of next years vehicle, to give you datsun boys a chance i will be bringing my brothers honda jazz!!, Only joking, hopefully my zed with maybe a few additions to it. Must say my fuel economy was good, up until the run to Kinlochewe, where keeping up with you guys took it down to 29mpg leaving me just enough fuel to make it back to my digs!

Hi guys we had to return home for new car because an hgv took the nose off the z at a service station on the m6 we are both fine & will be on the road with in the hour z is in the body shop please start a list of mods for them to do while she's in. sorry no type g this year more of seeing nessie, unless PURE will turn up.

yeah my contact details haven't changed since wales mate. should see you friday/sat nite as im also staying at Glenmoriston Manse last to start, might be first to finish again!

Hey, thanks to the meet organisers! especially Beavis Great to meet you all. glad people like the Type G just to set it straight the paint is Interlagos Fire http://www.350z-tech.com/zwiki/Fairlady ... _ST_Type_G For JDM plates try www.craigsplates.com the front number plate surround is standard the bottom of the plate used to hang until i got the smaller plate (G 7YPE) The rear is standard JDM also. just all characters on one line

ok cool ill apply the gloss before i wax next time. will look into that other wax, thanks! umm the water remover thing.... what would you suggest instead? its a bril tool at quickly removing water and avoiding water marks! sounds cool yea the lights are bril so take it they are the new ones (pretty sure) thanks for the real paint name "brickyuard" dont worry the two bucket method is always used! and yea the megs wash mitts are bril! havent seen another of the same colour apart from someone with pics in the US (had a kit prob nismo due to it winning some awards) as far as price. it was a bril buy may reveal cost later

and reply to before.... whats P21S??? never heard of it? it for detailing?

thanks for all the positive replies it was registered in december 2005 and released in 2006 thas why its got a 55 plate so whats different about my interior that makes it obvious its an 06?? also my son does all the washing/cleaning and detailing with me. we use a ton of different stuff. that day we used: auto glym shampoo some auto glym water squiji thing to get the water off megs speed detailer with the clay bar megs wax (some high class one i think) auto glym gloss simonz window cleaner and lastly for the black parts (baseplates) some mix a mate gave me with silicon not sure what the name of the colour is but the dvla listed it as brown more comments welcome

thanks, yea dont see many this colour in the uk not a fan of spoliers but maybe a lip if i can find someone to mix the paint colour!! thanks for the welcome posts

hey, after using the site to find out how to change the rear (fog) light, only thought it'd be polite to introduce myself. I had this imported June 07, its on a 55 plate. the exterior: the inside: know you like your pictures hope thats good enough