SunGodRA

subscribed

unsubscribed

test back

The noise doesnt kick in until about 4k revs while driving - then it should 'roar'

Its really easy mate - i found that the heat shield bracket needed a slight bend to fit, but apart from that its a piece of pi$$ to fit

What a @*!#! - in the immortal words of Chubby Checker:- "its a very hard life, when you got no wife, and the man next door's got two!

If you need to get away Mitch - I'm off to the Red Sea Riviera in a couple of weeks

Shxx mine have been stuck at the post office for the last 24 hrs as they were "too big for the letter box" so I havnt got much time to fit them, got a wedding at 1 also

Dont worry, my first ones were delayed as well, and went on okay - just dont leave it too long (certainly not 2 weeks! lol)

about as effective as a chocolate teapot

and for those that have recently purchased, make sure you fit them within 48hrs of receiving, as they are treated with a chemical prior to dispatch to allow them to stretch. A friend of mine waited two weeks before fitting and he had a nightmare stretching around contours (even though applying heat did help)!!

Watching police interceptors on 5 now and the cops have just pulled someone for tinted lights . They said it was illegal typical as iv just bought some

 

Lol I just watched that on 5 and was thinking the exact same thing! Hopefully these ones are okay though and not like the black paint used on that lads car!

 

Funny that..was going to say the same thing. Just watched Interceptor on Five.

Like I said earlier, FlyEye kit is road legal and meets MOT standards etc - its all about the amount of light that passes through and as you can see from my night pics they are pretty good. These arent traditional film or paint tints!

Thanks for sorting out my LED reflector Chris (an LED and capacitor needed replacing) - got it back in the post this morning

I have a fat-a$$ JDM bumper - no toe-eye (or at least on toe-eye cover on the bumber)

I'm still waiting for for bits to arrive, so in the meantime I thought I would have a play with Centrafuse. Had a play with skins - its actually a lot easier than I thought...

Here is CF3 normal skin

Here is a skin called Aqua which I modified with the Zed logo:

(the green circle around the logo indicated I have internet access )

I have also download some open source Front End software called 'Ride Runner' (formally known as Road Runner) - it is very configurable, and being open source its free! I will post pics of it when I have had a proper play.

I cant wait to get all this installed in the car now

As part of my CarPC project, I will be fitting a reversing camera but not sure the best place to hide it.

Has anyone got a rear cam installed? Can you please post pics/recommendations please.

Thanks David

Bear in mind whatever wiring you draw power from wasn't designed for that and the fuse protecting this wiring may well blow frequently. The only source in the car I would use for additional units would be the cig lighter as this won't impact anything else if it blows. But for your application, drawing a new line through the car is the way to do this in conjunction with an appropriate fuse. Either work out what current draw your unit takes and consult a wire size chart to choose the appropriate gauge, or overspec the wire if you are unsure. The former is always preferable. Volt drop shouldn't be a huge issue over such a short distance.

As much as I hate the thought or having to do it, I think you are right, I need to create a new line from the battery with inline fuses - I'm just not looking forward to running through the firewall

Current draw will be small, its only an Atom processor in the PC - current draw should be low enough to be in-sleep mode all the time its not in use, without having to shut down the PC - hence I need an 'always live' feed. The screen with be on a different circuit, and will only come on with ignition etc.

Is this a genuine mat, anyone?????

 

http://cgi.ebay.co.uk/Genuine-Nissan-35 ... arParts_SM

Holdcrofts (if its the same company) are a Nissan Dealer in Stoke-on-Trent

Does anyone know if there is an 'always live' circuit in either the boot or the cabin, or will I have to take one from the battery through the firewall into the cabin? (I need for CarPC build)

Thanks, David

Hello, I have read on many forums (even a US 350z Manual - http://www.courtesyparts.com/nissan-man ... n-350Z.pdf - Page 109)

that it is possible to open the windows from the key fob.

 

Is this possible on the UK models? I have an 05 Roadster and cannot for the life of me make those windows move.

The theory is push and hold the unlock button on the key fob, seems easy enough....

Also is it possible to get a remote roof open/close? and more importantly... remote engine start???

 

Thanks for any help!

Remote start is certainly possible and something I am looking into at the moment. The obvious benefits of would be warming up the car on a cold day, or even cooling a car down on a hot day. I will post more as I look into it

love the headlamps....i ve had the rears tinted for some time on mine now but

you have my intrestedin the fronts.

are you going to tint the rear bumper lights as well.?

Yep - I am going to do the bumper lights as well (Indicators)

headlights look awesome dude

U Irish Tart! lol - I love you 2

i would definately be up for a group buy on this, although tbh i am tempted to do it at 10.99 anyway, is there a guide on here for removing lights?

There is no need to remove lights - I removed rears because it was easy - I didn't remove fronts - honestly it is a peace of **** to do - see this guide http://www.flyeyeskit.co.uk/index.php?p=video

David

 

where from?

http://www.flyeyeskit.co.uk/

They do many different tints/colours

email Jason - nice guy and very helpful: flyeyes@sky.com

After speaking to Jason, a group buy may me available - subject to interest

I did the fronts this afternoon - I am really happy with the results...

at night....

with full beam...

and lights off...

I guess its a 'marmite thing' - I can see that some regard this as a bit chavvy - but I think it looks CLASS!