P15UL T

My Instagram is imagine_build_race and YouTube https://youtube.com/imaginebuildrace

Here's the link to Gary's one

No one 380rs and one version Nismo which is the same chassis and spec and the 380rs but with the standard HR engine. 

I have one here in kilmarnock Scotland and my friend Gary has one up in Aberdeen. He was the first one to get his about 5 years ago I think. 

I did hear rumours that there was a 3rd in the UK. Heard it maybe went to Ireland. Would be nice to get in touch with the owner. 

Paul 

It could be oil getting into he spark plug /coil pack via a worn rubber seal. Zmanalex has Replacment valve covers that lots of the guys have bought and fitted.

Worth pulling the spark plugs to check them. 

Paul 

Hoping to be in the market for a v1 370z nismo later this year. Need to sell my v3 nismo 350z first though.  Hoping to get an advert put together later this week.  Only one in the country and they are shooting up in value in Japan and America so it'll be a good time for me to sell. 

Doubt your 370z will be for sale for long though. 

Paul 

That's great to know. I'm in Ayrshire too, Kilmarnock 

Paul 

I had this on my HR. I had cold on the first click then as soon as you click it up a notch full heat.  I sourced another white control box behind the dials and it fix it. Be sure to get one with the same code as yours as there are numerous versions. 

Paul 

Pmd. Cheers 

I have this one for sale. Its a poly one from Tarmac sportz I believe. 

I bought it with a load of other stuff a guy was selling. 

It's new and never been fitted. 

£150 plus delivery 

Paul

I have a set available if these are gone. 

Paul 

6 hours ago, Shunter8 said:

Interested in the rear calipers if they’re by any chance still available? 

Not sure where in Scotland you are but maybe ask Chris at Dynatune in East Kilbride. He does alot of 350z/370z mapping so might know a good place for engine builds. 

Paul 

Hey old timer. I still pop in here from time to time. My zeditus never went away and currently have 4x 350z's here 

9 hours ago, Azzakaze said:

Oh right how long was yours on 14 psi before it went down to 5 psi ?, mine had always been on 28 psi, only just few days back it went down to 14/15 psi (weather was extremely hot outside past few days),I thought maybe  it was because of the hot temprature.My service is coming up soon,will see if it makes a difference otherwise I'll also be getting the Gallery Gaskets done too,probably will change water pump+thermostat alongside it too since they are located in the same area.

It hung around the low side of 15 when hot since I got it.  It only gets driven half a dozen times a year so I just kept an eye on it. Just decided that day enough was enough I suppose and spat the gaskets out.

Hoping to finish putting everying back together tomorrow so fingers crossed. 

Was about 5 psi when I got in the car after filling up. Was only my way to get mapped so lucky it happened when it did. Had been fine the week before when I had it out. Usually only went as low as 14ish once heated up. 

Building the car back up over the next few nights. Gaskets were fooked

I'm hoping to do mine tomorrow. The parts cost about £150-£200 from Z1 motorsports. 

I know a few folk that have managed it themselves so I'm hoping it's not too complicated. Just need to remove a whole load of parts. 

Paul 

This is insane. So much talant 

I have some... Here's a few 

6 hours ago, SHEZZA said:

Looks stunning @P15UL T I’ve been watching your YouTube vids so saw this a while ago.  I’m not on Facebook so not sure if you’d posted the 380RS on there. 
This must be 1 of only 2  in the country now then ? 

 Hey,  thanks for watching the videos yeah 1 of 2 now in the country but I think there is a black one in Ireland now. 

At last a nice sunny day in Scotland to get her out for some fresh air

Good work on the cats Andy. I've still got all this to look forward too 

Same here. Loving the progress and the ideas you have