Jump to content

JoKeR

Members
  • Posts

    544
  • Joined

  • Last visited

Everything posted by JoKeR

  1. JoKeR

    Wheel nuts

    Before anyone mentions I will be getting a refurb and powder coat. Thinking orange rims if anyone can get me a good price 😃 That's what she 'Zed' :-/
  2. JoKeR

    Wheel nuts

    For a 350z with standard Rays. I want some Neo Chrome lug nuts and want them to protrude out a little. Open ended too. I've seen these and I like them but not sure as they don't appear to have a locking nut. Also will they fit as the end has a 60 degree tapered end. What size socket do I need to fit these I'm guessing they're not the usual 22mm like they are at the moment? http://www.superforma.co.uk/home-featured/sf-d1-muteki-open-ended-wheel-nuts.html This is how it looks at the moment I'm looking at less than £40! Cheapo I know lol Thanks That's what she 'Zed' :-/
  3. PM'd That's what she 'Zed' :-/
  4. Thanks mate. Plenty in stock Kyle. You know the drill. PM'd That's what she 'Zed' :-/
  5. How much are they going for please mate? That's what she 'Zed' :-/
  6. Thank you That's what she 'Zed' :-/
  7. This is the metal part that covers the entire outside of the brake disc. Needed for the O/S/F (drivers front). 2003 350z Brembos. Thanks That's what she 'Zed' :-/
  8. As above for a 350z 2003 please That's what she 'Zed' :-/
  9. I sent a message as soon as it went up an that was ages ago still nothing back. Hopefully he's not away for anything too serious That's what she 'Zed' :-/
  10. Anyone know saihaynes outside of the forum? That's what she 'Zed' :-/
  11. I've been waiting to hear from him since it was posted mate lol still nothing yet That's what she 'Zed' :-/
  12. Best change the two at the same time. For a 350z 2003. And a place to change them in London too if anyone knows. Thanks That's what she 'Zed' :-/
  13. I had to get the ombudsman involved too haha! In the end I had to pay a fee for an engineer because they sent a check for repairs and cancelled any other work that I was booked in for. I would rather pay the extra than go with them again That's what she 'Zed' :-/
  14. I'm 22 paying £2000 in London with Adrian Flux! No points, 3 years no claims too! Was with elephant/admiral previously and had to make two separate non fault claims at different times and experience was shocking to say the least. I would not recommend them at all I have told everyone that. Might be cheaper but you will get done over when it comes to claiming for even a non fault accident! Just my 2p worth lol That's what she 'Zed' :-/
  15. JoKeR

    Fuse

    Usually top right fuse as you look at the fuse box behind the battery I believe. It is in my 2003. Should start then cut out or just not start. Same process for relieving fuel pressure That's what she 'Zed' :-/
  16. Think I'm gonna call dibs just waiting for him to come online and see my PM's That's what she 'Zed' :-/
  17. Lol he's not getting back to me tho he's only down the road from where I am That's what she 'Zed' :-/
  18. PM'd mate That's what she 'Zed' :-/
  19. I done mine in order to get it wrapped mate. I know what you mean it is on there tight and your probably thinking why the hell you started to remove it now!! I got a hair dryer (my Mrs' not mine), heated up one end for a bit then quick movements with fishing line. You will only get as far as the bolts on either side which I believe is about 4" in on both sides. At that point the fishing line will keep snapping as its rubbing on the bolt. All I did was heat up right next to the bolt until I could almost peel up the spoiler ever so slightly (not too much as it could snap). Then manoeuvre the fishing line to the opposite side of the bolt and continuing with the 1st process of heating etc. Once the majority is unstuck, you just pull upwards and firmly around the middle of the spoiler and it will unclip the two poppers in the middle of it. So 2x bolts (1 at each end) and 2 clips in the middle that just pop out with a pull. Once done you will be left (maybe, I was) with sticky residue where the spoiler once was. This stuff is nails to get off it took me a total of 4 hours. Peel and scrape as much as you can off then use some kind of residue remover of some sort (I used one by autoglym, worked a treat). I also had quite a few stuff marks on the boot from the fishing line (where I got a bit too carried away). Can't find any pictures from when I took mine off but hope this helped. If not then that's about 10-15 mins of my life I'll never get back lol! That's what she 'Zed' :-/
  20. I really like the white one you had Flyboy! How much would it cost to get this done if it was you doing it mate? That's what she 'Zed' :-/
  21. JoKeR

    WOT Box?

    Yes I knew that comment was goin to come up eventually. Think of it as an aide it's not like I can't control my car or I burn the clutch out every time I launch lol That's what she 'Zed' :-/
  22. JoKeR

    WOT Box?

    I enjoy driving! haha but I was under the impression it's only active when you want it to be?? That's what she 'Zed' :-/
  23. JoKeR

    WOT Box?

    Cheers guys so I guess this idea just stops here lol it's my daily drive and I just liked the idea of launch control and I really like the sound! Thought it was a cheap mod but by the sounds of it not in the long run That's what she 'Zed' :-/
  24. How easy are these to install mate? Can you see them when fitted if that makes sense at all That's what she 'Zed' :-/
×
×
  • Create New...