Y23DRH

Will these fit factory 18 rays alloys? price on them aswell please!

Message sent buddy

Hey buddy how's much for the surrounds around the two subs ?

now some pictures of how the car looks so far! more updates to come soon

then lastly went out for a nice drive with some friends and as we were going threw the b roads around oxford shire my mates suzuki gxr-r 1000 decided to throw a nice sized stone at my windscreen witch destroyed the glass screen so that was then replaced 3hrs later the new one was fitted

then come the new brake discs and pads all round! old ones needed replacing! more money spent! then the throttle pedal started to play up and was replaced then it was the tyres all round! now all the bushes and other suspension bits were replaced it was time for toe/camber set up finally some more new mods Weapon-R Neo Ti Secret Weapon Intake and air duct intake finally fitted (excuse the dirt not had time to wash yet) 2x purple cam covers oh and 1 x cup holder that my partner broke again (she's good a breaking them 3rd one this year!!) then drivers door handle failed! so stripped down the door to get to the part needing to be fixed new part fitted and putting everything back together

then come even more spending!!! driving threw central London and hit a pothole immediately the car was pulling all over the place and loud metal to metal grinding was heard managed to get the back local to a car park and had a look for the damage turned out to be the lower arm was bent and had come completely off the bush!! i also found a couple more worn bushes! so i decided to spend even more money and had every single bush replaced under the car and any other parts that need to be replaced where also done. so 4 weeks wort of work begun! ( and a crap load of money spent ££££s)

after this come even more spending!!! (would have been cheaper to buy another 350z!) new twin clutch and lighted flywheel then come the breakdown metal coolant pipe burst!!! luckily sourced the part required was a sod to fit but eventually got it on the car and that solved that problem i then got hold of 4x works professors ssr's decided to refurb them an paint them satin black

been a while time for some updates!!! so i got fed up with the bose headunit and replaced it with an old school alpine head-unit sounds so much better:) headunit fitted then it was time for a full service

Few parts needed Looking for preface lift 2005 350z gt in dash cup holder. Face lift front bumper any colour considered With fixings if possible Face lift hr bonnet any colour Considerd Led 350z rear lights 350z gt roadster roof complete If any one has any of the above please get in touch Many thanks Dan

Legend. if you have pm me. sorry for the late reply! i had a look in the garage and i cant seem to find the parts, but i will have another look Saturday afternoon, if i find them i shall send you a message.

i fitted 40mm rear and 35mm front hub centric spacers not had a problem with them also rolled the rear arches and the car is quite low drives fine. back to the thread, im sure i have some 30 and 35 mm hub centric spacers in the garage, i shall have a dig about and see if i have them still.

208.000 miles still going strong! (touch wood) after nearly 10 years of ownership just had a major service and also replaced all fluids gearbox, diff, brake fluid, power-steering fluid every thing that can be replaced has been . timing chain is next no rattle yet! but like to do it for peace of mind . any one know a good mechainc to do it? local ish to buckinghamshire only takes about a litre of oil every 4 to 5 months now can go back to adding more mods. and hopefully many many more miles ahead.

its a long shot i know, but i'm looking for gun metal Grey front bumper with washer jets, and a gun metal Grey rear bumper, let me know what you have! will also consider other design bumper after market etc looking forward to any replies Many Thanks Dan

I have got a hole in the metal coolant pipe tiny pin hole leaking coolant out need a the part for 2005 350z gt roadster vq35de A price on new and used if possible plus delivery also i have still not managed to find a throttle pedal sensor inside the car so if any one has one for sale please get in touch pictures attached below alex aka (clark motorsport) has been notified already Many Thanks Dan

pm sent

ok will have a look an see .. cheers

Ok thanks buddy will see it can find the part number and get one ordered its such an annoying intermittent problem thanks for the quick reply

Awesome cheers buddy will get one orderd tomorow I take it its a main dealer only part?

Code reader says P2138 Wrong accelerator peddle postion sensor rationality signal

P2138 code has come back on Done both reset procedures but still comes back on Any ideas what the problem could be

my roadster is doing good then 206.000 miles and rising every day ( not sure if any on else can beat that or not ) owned the car 9 years now and has been so much fun to modify and drive and own bought the car with roughly 17.000 miles second owner from new full history etc from day one always maintained and serviced regularly no expense spared

have you hit 200.000k yet ???

Any one got a link for the item as would like to purchase one that link is no longer active

seems a bit cheap to me 350z roadster in white low miles aswell http://www.ebay.co.uk/itm/Nissan-350z-Convertible-Project/272104974335?_trksid=p2047675.c100005.m1851&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D20140122125356%26meid%3Ddc58142d84714934a9fe70422ab4834f%26pid%3D100005%26rk%3D2%26rkt%3D6%26sd%3D151945460593