dErZ

Does anyone have a non working window motor they don't want? I want to see if I can fix it by installing replacement bushes.

Cheers Chris

So seat out, rear of seat opened up to see if any breaks in the cable, all looks good. Just left the resistor connected to the seat loom and tried the code. Car still shows passenger side airbag faulty. So seat back in all connected up still the same. Mebe my resistors are all dodgy......

I debadged the rear and fitted footwell lighting

What error code are you getting?

Hi,

Put the below into eBay. You should get change from £15. You can pop over to mine if u want to check any dtc's.

Car Diagnostic Scanner CAN-BUS Fault Code Reader OBD2 OBDII EOBD EOBDII U480 UK

I'll take the seat out on the weekend and see what I can find......

I've played a Santapod twice now but only in my bothers 325, we only go up when it's raining so to lesson the damage to tyres, drive train etc..

So I spoke to the chap who had the cable issue in the back of his seat. Alas he couldn't help.

Who else has the resistors connected to alleviate the Srs issues?

So srs light flashing again so do the

ac on light flashes turn off (within 1 sec)

leave for 3 secs

turn on light flashes turn off (within 1 sec) * 2

then turn on just the usual 2 secs off then 3 secs on

so car off and back on in 1 sec light reset...

come back to car later light flashing so put it back into diag mode and this time I get 2 quick lights but it doesnt repeat ffs!!!

I tested the resistors before installing 2.2 on the nose. (All 3 of them) with regards a break in the wire there's only a small length before it goes under the carpet. How am I going to test that?

That's what the consult II print out states. It shouldn't be erroring with the resistor in place.......

So I know I have an issue with the side passenger seat airbag. Car went into Nissan and they diagnosed this, in the process they cut the yellow connectors out from under the seat and soldered the 2 wires together. So there's an issue with the bag which is why the SARS light blinks. So I spoke to zmanalex and he has a spare side bag but I'm a bit broke ATM so I ordered a 2.2 ohm 1/2 watt resistor off of an eBay seller. I cut the 2 soldered wires ( after disconnecting the battery) and installed the resistor on the 2 wires that go into the car. I then did the car on car off key thingy to reset and it worked for 10 mins and the the srs light came back..... Went to a garage and got the error removed again ( still remembered side airbag issue) but the light has come back again.

What else can I check/test? Do I only need 1 resistor per seat or does it need multiple resistors?

At help greatly appreciated.

Cheers for the link. Definitely going to this. Shame it's 4 hrs away which means staying in a Travel lodge for 2 nights.

Car has been sold. To me. Mods can you close this thread please

Can I ask how much the day cost? Got a link to it?

I went to Pod yesterday and your Zed is the only picture I took as I thought it was the only picture worth taking! the pix dont show how lovely the colour actually is. Well done mate.

How LOUD was that Jet car!!!

Great pix!!!

Cheers chaps, are there any 16" that will fit on the rear?

I did search but wasn't very successful. I'm after some uber cheap drift wheels, will 16's fit and if so what do peeps recommend?

Not a group buy I just was being tight because I didnt want to pay $30 in postage. If you order more than one then the extra items are $0.99(delivery), then we can divide the postage

I dont mind ordering items for the chaps local to me as I can just deliver it to them, otherwise you'll have to add UK postage on top of the other fees.

Looks good mate, if you wanna come to mine to clean. Ive got magifoam and a big drive way to do it on. Did the misses and her friend tonight.

Z33 hoodies or Tshirts from the US.

http://www.ebay.co.uk/itm/110775498855? ... 97.c0.m619

We can share the postage.

Just went down to a reputable paint shop and they have quoted me £420 to respray the front bumper and bother rear quaters. Does this sound like a good price? will there be any issues with putting the car in the oven (the hood etc?)

If anyone needs to read or reset dtc's just shout.

Purchased from eBay for £15

Car Diagnostic Scanner CAN-BUS Fault Code Reader OBD2 OBDII EOBD EOBDII U480 UK

Got my kit delivered very quickly. Fitment was very straight forward following the 'how to' only takes 5 mins to do. Haven't had a chance to take the car out to yet but I'm looking forward to it. Thanks FLYBOY.