Jump to content

Dannyg

Members
  • Posts

    584
  • Joined

  • Last visited

Everything posted by Dannyg

  1. Will also consider a manual 350z Sent from my F5321 using Tapatalk
  2. Hi Guys After being away for a while I have the twinge for another zed, It is a long shot as the cars slightly older and a small downgrade but looking to swap my Audi S3 + some cash for a Manual 370z, details below, Hopefully one of you guys are after a quick car with 4 seats ;D if not I will definitely be on the hunt for one as soon the S3 has gone…. 56 plate, Audi S3 Quattro £10,500 (3 door) 65,100 miles, (daily driver so will increase) Revo'd by local Revo approved installer, (Dialynx in Swindon, was 265 now 300bhp) Full Audi Dealer service history LED interior light upgrade, (Vanity, door ajar-front and rear, and footwell lights), S3 Logo puddle lights Led Sidelights Factory fitted HIDs Manual Gearbox Isofix Two tone Leather seats Flat bottom S3 steering wheel Bose sound system MOT’d till November Both Keys available, Heated front seats Tinted rear windows A/C New front tyres since November Audi S3 logo floor and boot mats Car has performed perfectly since I purchased it in 2015 and is in great condition, the only performance modification is the remap done by the local Revo approved dealer Dialynx and has only ever been run on V Power Nitro. Private Reg not sold with vehicle – Original Reg: MX56 ZWA (in process of swapping over) Bad points B pillar trim is flaking a little, and that’s about it.. The car is in great condition Only reason i am selling is because i want a 370z Any questions or if you want more pics please ask, Dan
  3. Car now sold Sent from my E5823 using Tapatalk
  4. Thanks Veilside, will take some better ones this weekend after shes been washed, I know it being an auto will put most people off Sent from my E5823 using Tapatalk
  5. Picture of the rust on the front left wing, nothing major The seats are actually in good condition, the only rip really is shown below will add a pic of the stone chips later on
  6. Thanks for the info, was at work when I uploaded it and was getting a bit annoyed with uploading the images, I'll have more added tomorrow Thanks again Sent from my E5823 using Tapatalk
  7. Time to sell I loved owning this car but need something more practical now Car is a 350z Import Kuro Black GT (Version T I believe) comes with heated leather seats, Radio controls in steering wheel, Bose sound system, electric seats, electric wing mirrors and jap satnav which I have removed and replaced with a standard cubby I have had the brakes upgraded to brembos as the JDM did not come a standard 2 years ago which was £900+ Price of £5000 is for the vehicle as is, Nismo Replica front splitter Rear Replica Chargespeed bumper Aftermarket 19inch dished wheels 25mm Spacers on rear Carbon Engine Cover Plenum Spacer Magnaflow performance Exhaust Decats (car will come with CATs for MOTs) Blacked out rear lights (Never failed an MOT with them on but will throw in the standard red ones too) Show n Go Electric retractable front Number plate with fobs Sony Bluetooth DVD head unit, can also be used with steering wheel controls Custom built Under Strut Subwoofer, Pop charger Xenon Head Lights DLR LED side reflectors Carbon Eyebrows LED Interior lights Tinted windows 2 keys Private Plate not included (original KD52 CWA) Cargo net Spoiler removed Wiper delete Brembo Brake upgrade from standard JDM brakes Vehicle is coming up to 85000 miles (Actually 2400 less as a result of the conversion when imported) MOT until February, never failed or had an advisory other than wiper blades Tax is only £205 a year being an import, all import documentation available I am in the motor trade so I always know some one who can do maintenance/Servicing if I am unable to do it myself, I have a folder of receipts for everything! 4 Previous owners Car only ever run on V Power Nitro since I have owned it Bad Points are as follows, Small Rust patch on front wing Bonnet could do with a re-spray, previous owner got a cheap job done, wanted to replace with HR bonnet so never got it done Usual Stone chips on front Cup Holders a bit sticky Plastic Under tray no longer on car No Spare wheel, (because of the brembo upgrade) Can of tyre foam instead Usual signs of wear and tear on seats I will look to get these issues fixed early next year, if still on my drive by then, but the asking cost will be around £6000 I have tried to be as accurate as possible but probably forgotten a few things, if you have any Questions, require additional images let me know 07875401418 Vehicle based in Swindon, Cash only Dan
  8. Never mind I just see it said "pre HR" Sent from my E5823 using Tapatalk
  9. Hi mate, U able to send the bonnet?, it says it's for a HR but I can't see the bulge Sent from my E5823 using Tapatalk
  10. I had these lights come up the other month turned out to be the cam sensor had failed Replaced them both and it fixed it
  11. Ha http://www.amazon.co.uk/s/?ie=UTF8&keywords=samurai+kitchen+knife+set&tag=hydrukspg-21&index=aps&hvadid=34812883201&hvpos=1t1&hvexid=&hvnetw=g&hvrand=16489290961182434746&hvpone=&hvptwo=&hvqmt=e&hvdev=m&ref=pd_sl_7nr3xm7muh_e
  12. Oh yea, my excitement has caused me to do a number of errors today! I also recieved these kitchen knives which added to my excitement lol [
  13. It's here it's here.. But I got to go back to work Project Car ...................
  14. Yea shezza is right, i misplaced it found a pack of 20 for a few quid so if anybody needs one let me know..
  15. Why so you can! haha nice one thanks Neil
  16. Need the spring clip that holds the caliper pins in place Any body got one please, for brembos.. thanks
  17. Success!! And all i needed was a Costa card.. Fyi slide card behind lens from front to push clips in and it pops out.
  18. Really! F**kin nissan bulbs all have to be accessed from behind the wheel arch liner lol Got to be a way to remove it from the outside
  19. How do you get them off? Thanks
  20. Damn it! if i didnt have a wedding to pay for i would have this!.. Spose i coukd always call it off
  21. Got a P0340 code bank 1 cam sensor, replaced both sensors thanks to lee Crawford for the sensor and his advise, but still have the ecl on. All wiring to the sensors seems to be ok and an ecu reset hasnt resolved it.. Any other reasons for this?
  22. Took my mum out in mine when i first got it... she screamed in terror.. Gunna try and trick her into getting in it and film her reaction next time. I got smacked as soon as we got back..
  23. Never mind got one for tomorrow thanks again for your help guys
  24. P0340 error code is the code specific on which bank it is?
×
×
  • Create New...