Cro

I'd imagine the clutch was slipping and on its way out under the extra stress. Having said that you say you gave it some revs which the clutch was in and then dumped it, that's not too good for any clutch, how many revs are you talking?

Looks like massive gaps between the bumper and the lip though?

TDC / crank position sensor perhaps

Sounds quiet to me Just kidding, sounds about the perfect mix for everyday use... for me anyway. I know some prefer it to be ridonculously loud

If your car hit into another car does that mean they'll be looking to claim off your insurance, the same way it would do if it was a bump at traffic lights say for example and the guy behind you pushed you into the car in front?

No they go to the steering control look plug

Exactly what I ended up doing in the end, works grand thanks to the wiring diagram

If that's a decent engine, and you had a rolling shell or car with engine damage thats definitely a viable option

The brembo red colour is perfectly matched by the red used by hobby painters, planes, trains etc ... if that helps. Was perfect for mine on the clio

As above a pair of canards and attachment bolts for a nismo v2 bumper, came off my chilli red

Good condition, has a stone chip or two but grand if you were going to repaint anyway

Can post on request

£40

Yep, or so it says on the label anyway. The link buster put up has instructions on what to do with the 3 loose wires so maybe it's normal , either way that diagram should sort me right out. Cheers buster

Thabks buster, I think it should have a female plug on it and be nice and simple plug and play but for some reason it doesn't.

Photos from other threads certainly show theirs having a plug on it anyway

what head unit you fitting ?

Pioneer avh-x5600bt

For some strange reason my ICT steering control loom did not come with a female plug to fit to the cars connection, just the usual 3 wires+pins needed. Any thoughts on the best solution?

Could probably just place the pins into the plug but I have no idea which ones these three need to go to

Must be cold there. Tell her it's a grower

Any settings changeable in the unit itself? I'd imagine definitely for NAV

I'll take those if they are for a DE

Theres quite a few of us from over here, how can we help?

edit: Are you asking for a local stockist?

Starting the hunt for the above, might consider a different brand of HFC

That is just superb! GLWTS

I agree with Luke, spare set of arches no matter the colour as they'll need painted anyway after being chopped and riveted then revert easily enough for resale. Unless the rear 1/4s are planning on being done too I guess

Says £55 in that link still

Should have nismo indented in the underside of the box if it is nismo as well as a weldina plate welded to it. Cheap regardless though nismo or not

Did the previous owner remove the V1 for the V2?

Yes Kyle, I have a suspicion judging by this bumper and its scrapes the v1 succumb to parking and turning cracks/bumps. It was all factory fitted original too which is a little gutting but once I have the canards off and it repainted it should look well