ChristopherJames

Hi all, I recently just purchased the Pioneer SPH-DA01 AppRadio and fully installed it yesterday After reading various install guides I purchased a ICT 29-672 Cable (This allows a new headunit to be connected to the bose system whilst still retaining the steering wheel controls) and a 29-007 Cable (This is a Pioneer specific adapter for the above cable) to hopefully retain all functionality of my steering wheel controls. I have fitted the unit and the everything seems to work fine except my steering controls and the mic (using the original mic already installed in the car. Can anyone help me in what I may have done wrong or just completely missed out on doing to resolve this problem. Thanks, Chris

Do the controls on the steering wheel still have any functionality with this head unit?

Yes it's off a coupe.

Hi all, Just thought I would post links to a few bits I have on Ebay right now. Rear boot spoiler, http://www.ebay.co.uk/itm/120859087721? ... 500wt_1362 Rear wiper motor and arm http://www.ebay.co.uk/itm/120859089174? ... 500wt_1362 Rear Badge http://www.ebay.co.uk/itm/120859086229? ... 500wt_1362 Side repeater lenses http://www.ebay.co.uk/itm/120859085392? ... 500wt_1362 Arial unit http://www.ebay.co.uk/itm/120859083517? ... 500wt_1362 Z side badges http://www.ebay.co.uk/itm/120859084513? ... 500wt_1362

PM Sent

Hi, The bumper in in gun metal but I can primer it if that makes it any easier as there are a couple of areas I need to touch up. I can get it off by then at a push but you won't get it in the back of a zed.

Im gauging interest to see if anyone would be interested to buy my standard front bumper that has had the reflectors, number plate mounting holes and badge recess smoothed out. Ideally will be looking to get this off the car in the next couple of weeks. I am able to provide it as is, in primer or at an extra charge in paint of your choice. Im looking for £200 + delivery.

I have been planning to do this mod for a while now. I think the N1 spats smoothed into the rear bumper look amazing! I have never seen it done up until now and this has defiantly spurred me on to get it done. All I need is some cheap N1 spats and I will get this done.

Hi all, After taking a trip down the motorway the other day my arch lining decided to come off. So I need to get a new one. Drivers side, front. Anyone?

Hi everyone, It's time for me to replace my tyres and I have been wanting to replace my rays for a while so I think it's the perfect time for me to get some new wheels. Ideally I'm looking for varrestons or something with a dish as I'm going for the slammed us look. If anyone knows of any going or suggestions it would be great to hear from you!

Thanks for all the replies guys. Neil, I was tempted to name and shame but if thats how they want to use the forum then me putting something up on here will make no difference and just drop me down to their level. They know who it is, just makes me less likely to use the forum to buy or sell anything. Cheers, Chris

Thanks for the quick reply, I actually work for Lexus so I was going to see if I could get them through a dealership at trade but not go around to it. Just with the for sale section, being told I could have them and waiting for a postage price and in that time the person selling had sold to someone else.

After being messed about with sales on here I was wondering if anyone has any 350z mats, both drivers and passengers and boot would be great. Thanks, Chris

Thanks for that, I had a quick read last night but just wondered if anyone had any more information before I make the decision to by the new unit.

Hi all, Im looking at buying a Pioneer SPH-DA01 head unit to replace my bose one and what I was wondering is how can I still keep all the steering wheel controls and if it is possible how do I go about doing that as I'm sure it won't be a straight swap.

I am after on of these bonnets! How much are they going for? And if anyone in the Leicester area wants them painting I can do that.

All sorted thanks to CS! Thanks for all the help!

Cheers for the help guys, muchly appriciated!

The title makes it pretty clear. My locking nut key shattered whilst trying to remove it so need a new set of locking nuts. Also after a set of black wheel nuts to fit a set of rays. Finally a set of spacers 15mm and 25mm. If anyone has any info let me know. Thanks, Chris

Anyone interested in a set of newly refurbished Rays?! Confirm tonight to have them painted in a colour of your choice!

Ok so the refurb is happening tomorrow. Anyone interested? Speak now or they are staying black. Open to sensible offers.

Hi all! I am looking to replace my Rays and have found the wheels to replace them, now all I need to know is if anyone would be interested in mine. I have quickly taken some photos to show you what are up for sale. Right now the wheels are in black and not in perfect condition but on Saturday I will be refurbishing and spraying the wheels so they will be in perfect condition and can be painted to the desired colour if something other than black. They wheels will also come with tyres with the front needing to be replaced in the not too distant future but the backs having a little more life in them. (I can get all the tyre details tomorrow when its light and a bit warmer) I am looking for £500 and would want the wheels collected from Leicester or a currier can be arranged at an extra cost. Like I was saying I have only quickly taken some pictures but I can take new ones tomorrow in the light if needed.

That is exactly what im after!

I am from leicester too! Would you be willing to give me a helping hand in doing mine if I decide to do it? Yer im more than happy to give a helping hand. Like I say im no expert though but if you need a hand just let me know. I got my vinyl from a company in poland on Ebay. I think it worked out at £32 delivered and it is genuine 3M gloss black. Im from Aylestone and am back an forth between Leicester and Lutterworth. I havent been to any meets yet (although going to JAE this weekend) I have a GM Zed with black wheels and black roof. Where abouts are you from? If you need a hand with the roof if you do it yourself I can give a hand but im no expert. Sounds like you used the same place as me Yer must be the same! I couldnt fault the stuff. Good price, fast delivery and Genuine 3M!

I got my vinyl from a company in poland on Ebay. I think it worked out at £32 delivered and it is genuine 3M gloss black. Im from Aylestone and am back an forth between Leicester and Lutterworth. I havent been to any meets yet (although going to JAE this weekend) I have a GM Zed with black wheels and black roof. Where abouts are you from? If you need a hand with the roof if you do it yourself I can give a hand but im no expert.