Sunny1

Looks i'd be interested in one, hopefully it matches the same finish has on the aluminium vents i brought last year

Sorry if this is a repeat post

to the club very nice selection of metal

Spotted a GM 04 plate on the M6 Motorway jct 2, i pulled in @ the service station (Corley, welcome break) and the Zed pulled in as well arond about 2.00pm today

Nice one CS, Can you PM me the price please, look like i'll have buy two pairs of shoes now for the G/F

Cheers, I think i'll invest in a set of 25mm spacers and stick them on the back and the current 20mm will then go on the front, should look tempted to lower the car has well by 1" at least any suggestion would be appreciated

Took advantage of the wheather and put the 20mm spacers i brought off CS back in December.....look All i need now is a set for the front which i will get soon after i bend the my good lady's arm.. might have to buy her a pair of shoe's has a trade off(Matalan do some nice footwear me thinks )

Sorry to hear this Andrew, my thoughts are with all of you

Ozz i believe you can get it cut from a local lock smith ( i've been told to take my new blade in to Nissan and they will cut it free of charge by one of the managers.... which i thought was nice of him. PS i paid £13.50 for the fob and new blade

Your right ab350z, i got quoted £51 to have one fob programmed, i then asked how much it was for a new key and the fob programmed...... answer £131 + vat.

WOW! the Volvo P1800 would'nt look out of place even today

Hi all, Having trouble with programming a new key fob i have brought of e-bay, i have started the steps 1 to 10 as listed below but keep on falling down on step 3 (i have tried about a dozen times or so leaving a short time between each try and locking/unlocking the car each time), i have even got the g/f to look and see if the hazards/warning lights come on, my car is a UK one and it only came with one key, hence the reason why i need another one, i suppose my question is if the car comes with three keys originally would one of the three be a master key which would allow you to programme from using the steps below or would any one of the three keys preform the programming sequence. 1. Turn the ignition switch from Position 0 to ON 6 times within 10 seconds. 2. Then turn ignition switch to OFF position. Leave key in ignition switch. 3. After 2 seconds, the system will enter programming mode and will flash the warning lights twice. 4. Press and HOLD the unlock button on the Plip. 5. While pressing the unlock button, press the lock button 3 times. 6. Release the unlock button. 7. The warning lights will flash once to indicate successful programming. 8. Repeat procedure 4 to 7 for up to 4 plip key’s. 9. When completed turn ignition ON, and the warning lights will flash 2 times. 10. Remove key, and check all plip key’s for operation. Any help would be much appreciated

Very nice indeed, they definately would suit a zed i might just give them a ring and find out if they do a similar or same rim polished

Thanks again Martin nice one mucca

Cheers Martin nice one

Hi all, I'm After some help, i need to have a new key for my car, i have come across a seller on e-bay selling the blade and remote control-unprogrammed, he reckons i can get it cut and re-programmed for around £60.00 quid. My question is can i re-programme the key fob myself or do i have to go through the main dealer. Thanks for any help in advance.

Very nice looking Zed even better now its been washed

+1

[/img] Seen these on a web site, they look rather nice

Cheers Stew Who is grant? and what is his username Here you go... http://www.350z-uk.com/forum/viewtopic ... bd5f1ba227 Cheers CS, You have a very good knack of coming to others rescue Wheels are amazing might bid on them myself

Cheers Stew Who is grant? and what is his username

I wish i had'nt started this thread now seeing the pictures of the roadster with the rims on makes me sick Going to have to see my back manager now

Thanks for your help who is Andy? Ignore the plea for help

Thanks for your help who is Andy?

Hi all, After some help on finding wheel rims that will suit a roadster, willing to go upto 20" must be polished. I like the look of these i have seen on e-bay (ascari penta i think ) http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 0344037996 Appreciate any comments on the rims in the link above Any recomendations would be gratefully welcomed