nrenz123

marry me?

Hahaha a cat! after first spotting it i thought it was a bird and its beak...

"Shortly to appear in Max Power and Banzai" in the for sale sections no doubt

Cheers mate, The bracket is something i had made at work. If you want one i can get one done for around £10 + postage. There should be some pics of it in the thread about number plate brackets in this section. Nath.

Mine will be up for grabs when i get the new carbon one.

I'd love to come Ian, if im not working that is. I have been keeping an eye on the meet thread

I would like a mirror finish mate, to match the stainless intake pipe. I have thought about poweder coating but im not sure if i'll be able to get it in the finish i want. I had the cam cover on my last car polished, i know its an arse to keep clean but i do think it will look better.

Since having my kit fitted i have noticed that my undertray is starting to sag like tongue of tired dog. Its ok on the passenger side but on the drivers it is hanging well below the front edge of the lip. It is attatched fine to the bottom of the bumper but as you move backwards that is where it sags. Should there be a bolt there or something? if not the trusty cable ties will come out.

Hi mate, mine dont scrub at all. but they are only 18's.

I can see what you mean by the gap between the headlight in the pictures. There is a gap there but it folloows the line of the bonnet but it is even and consistent. That is probably a better representation Nath P.s i REALLY need some 06+ headlights

Cheers for the comments so far Gaz i will be in touch shortly for some of the black Z badges to replace the nissan burgers and also possibly a strut brace.

After i had the N2 kit fitted a week or two ago i wanted to take some pics, unfortunately i am no photographer so untill i get some done properly then these will have to do The day i bought her And as she is now I'm unsure wether to fit the N1 rear spoiler and possibly one of the rear diffusers from prestige (gloss black), but for now im liking the car without the canards. Next on the list is polishing the plenum, new strut brace and a few carbon bits to tidy up the engine. After that i dont know apart from the K2 and Y-pipe when Japspeed get them back into stock. Kit supplied by Rik @ Prestige. Fitted and painted by R & J Autocare of Carterton. Nath.

Spotted a gm coupe at around 3 yesterday heading from Swansea up Fabian way. Looks pretty standard apart from a set of alloys, might have been lowered! I was parked opposite, stuck in the traffic lights exiting SA1.

But then the whole plate would be attatched to the mounting bolt permenantly. Would mean you had to twist the bolt and the mounting plate as one peice together no?

why not fit a gtr badge at the same time why dont you suck my balls HAHAHA!

The kit was from Rik at presige. The front needed a little work as did the top of the skirts to get them to fit flush with the door sill but overall the guy said it was one of the best fitting replicas he had seen.

Pics of it together and fitted.

I've had the head of the bolt cut down so that it is a lot slimmer, a bit of trial and error has made me think if i were to make more then i would use a bolt with a countersunk head so that it would sit more or less flush with the rear aluminium backing plate. Also in the centre when you see the large hole cut out i would do a row of smaller hole to fit the bolt allowing the plate to be mounter higher or lower to each persons tastes. It will be pretty simple to make different size backing plates for UK and JDM size licence plates. If you guys do want one or have any input to improve the design im all ears

Ok cool, so £85 delivered?

did you mangae to get a price for the delivery mate?

The mounting bolt is an issue as it does protrude more than i would of hoped. I'm going to see if i can get hold of some thinner bolt heads or try a re-design. Or possibly a mushroom headed bolt with a phillips drive is another option.

Jusy picked up the bracket i had made up. I'm mounting the plate with double sided stick foam/tape. If anyone would like one give me a shout and i'll see what i can do.

I wont look to make any money from them but they will be £10. I may look at getting them polished but they will need laquer to stop them corroding, not that you will see them anyway

I'm having a bracket made up that will fit into the tow bar mount. I spoke to 3Fiddy about this and we had the same idea. Bar with a thread on the end into the tow eye hole, then tap a thread into the the of the bar. Followed by a bracket mounted onto the end of the bar with a bolt and washer. I'm having one made up by the workshop on camp it should be ready tomorrow. I'll post up some pictures and if anyone is interested i should be able to get more made.

Do you know what size you used? think i might attempt it tomorrow, weather permitting.