chrislich Posted July 11, 2015 Posted July 11, 2015 Was attempting to remove my back box today to fit my single silencers, what a pain in the butt that was. Took me all day to end up with no back box on the car, 2 broken studs and 2 nuts I had to cut off. Tomorrow's job is to get a g clamp to push the studs out of the mid section then I'm good to go! Quote
350zedd Posted July 11, 2015 Posted July 11, 2015 Dump the effin lot and get yourself a decent aftermarket stainless system! ha ha! Quote
chrislich Posted July 11, 2015 Author Posted July 11, 2015 I wish I had now but kind of difficult now I have no back box on Quote
GMballistic Posted July 11, 2015 Posted July 11, 2015 I wish I had now but kind of difficult now I have no back box on Start the Zed up like that just once, ...it will sound awesome I bet. 1 Quote
Neilp Posted July 12, 2015 Posted July 12, 2015 I'm sure the studs are welded in so a G-clamp will be a waste of time, you will need to cut/grind them out. Quote
chrislich Posted July 12, 2015 Author Posted July 12, 2015 Well I ended up drilling holes through them. Fitted back boxes drove out, was too loud all the time so took back off and refitted standard. I thought at certain bits had nice deep tone but it gad noise all low down. Even driving carefully had quite a boom. Oh well back on the hunt Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.