Uneven disc wear.

[the_doc]

After recently checking my disks I've noticed a fair bit of wear on the inside face compared to the outer. Is this common to the brembo set up on a zed or has anybody had the same experience?

 

New disks and pads should be arriving 2m so I'll provide some pics when I strip them.

 

Jay.

[Justthejedi]

haven't had that before but mine have an imprint of the pad on the outside edge in 3 separate places where I've sat on the brake pedal at a junction and cooked my disc!.....now starting to judder and squeak when braking....

[brillomaster]

yep, mine were worn a lot more on the inside.

 

never go by just how the outside face looks, need to get the wheels off to inspect properly.

[ZMANALEX]

Insides front and rear wear out quicker than outsides.

 

Alex.

[the_doc]

Cheers for the responses, plenty of meat on the outside but running my hand over the inner edge felt a lot of scoring. Fingers crossed its the same both sides and no issue with seized pistons.

[the_doc]

Well it appears it was just degraded pads after replacing them today. Here's a pic.

[MITZ@CougarStore]

Jay, pleased the couriers didn't let us down, see you on Sunday...

[the_doc]

Both inner sides were well worn but the outers were pretty fresh. Big thanks to cougar store for sorting me out with disks and pads at short notice.

[the_doc]

Yeah, they were good cheers mitz. Thanks again and I'll see you Sunday.