RichCox350Z Posted July 10, 2014 Share Posted July 10, 2014 Can anybody please help me....? How the #@$! do you remove the vanity mirror glass out of the visor?? Been struggling for a couple of days now! Thanks in advance! Quote Link to comment Share on other sites More sharing options...
Baidan Posted July 10, 2014 Share Posted July 10, 2014 this was a good thread, any use? http://www.350z-uk.com/topic/71886-vanity-light-led-upgrade/ Quote Link to comment Share on other sites More sharing options...
BulletMagnet Posted July 10, 2014 Share Posted July 10, 2014 Oh, you can get the whole plastic bit out, just pull the whole frame from the visor. If I remember rightly, there is a slight groove to the plastic frame for the visor hole edge to sit in, if you get what I mean. Quote Link to comment Share on other sites More sharing options...
BulletMagnet Posted July 10, 2014 Share Posted July 10, 2014 Actually I was wrong, just checked on a JDM visor I have laying around (hence different bulb) and it's four tabs that hold it in place. Lift the lower edge first as the tabs are differently orientated at the top (see red circles) When refitting be gentle when snapping the lower tabs back in as too much force can break the mirror glass. Hope this helps Quote Link to comment Share on other sites More sharing options...
RichCox350Z Posted July 10, 2014 Author Share Posted July 10, 2014 Spot on!! Cheers bud, i was a bit too forceful when changing to LED and managed to crack the glass! So 7 years bad luck for me it is! Quote Link to comment Share on other sites More sharing options...
BulletMagnet Posted July 10, 2014 Share Posted July 10, 2014 If that were true, I'd be having 14 years (Yeah, broke both driver and passenger ones) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.