Posidrive Posted July 1, 2013 Share Posted July 1, 2013 Changed the pads myself for the first time ever this weekend and was pleasantly surprised how easy it was with the Bembos although why the pins are reversed on the rear calipers is quite beyond me. Makes pushing them out quite a pain. But when doing the front driver side I couldn't get my trolley jack under the car which was too low by about a quarter of an inch whereas I had no problem with the passenger side. Had to resort to the manual jack. I also noticed that the front tyres are wearing unevenly, much more wear on the right hand side of the tyre. Any idea what could cause this? Quote Link to comment Share on other sites More sharing options...
370Ad Posted July 1, 2013 Share Posted July 1, 2013 Compression arm/banana arm bush failure is common for the Z. This would knock your tracking out, not sure about the chassis level though! Quote Link to comment Share on other sites More sharing options...
Posidrive Posted July 27, 2013 Author Share Posted July 27, 2013 Thanks for that. Drivers side bush was completely knackered. Had both changed yesterday and now car is perfectly level as well. Hopefully the new tyres will last longer . Quote Link to comment Share on other sites More sharing options...
gsexr Posted July 27, 2013 Share Posted July 27, 2013 Every garage needs one of these matey http://www.machinemart.co.uk/shop/product/details/ctj1250a-11-4-tonne-aluminium-trolley-jack Quote Link to comment Share on other sites More sharing options...
Neilp Posted July 27, 2013 Share Posted July 27, 2013 Every garage needs one of these matey http://www.machinema...um-trolley-jack better with super low entry ones that you can buy from costco and the like. Quote Link to comment Share on other sites More sharing options...
scobie140 Posted July 27, 2013 Share Posted July 27, 2013 Every garage needs one of these matey http://www.machinema...um-trolley-jack I just drive onto a few scaffolding boards to give me the extra clearance to get the jack in, really should invest in a low jack though much less hassel Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.