Bonnet release handle / cable failure

[DP7657]

Guys, anyone got any experience / advice for this issue?

 

When attempting to get to the bonnet to fill up the screen wash last week I found that the bonnet release handle had not effect and I couldn't get the bonnet up. I'm not aware of having pulled it particularly violently at any point so don't really have any idea of how I could've caused this other than general fatigue.

 

The bonnet release cable seems to have disconnected itself (possibly at the bonnet catch end) or something similar because the handle no longer opens it (the cable is still being pulled by the handle but there is no resistance from it). I've tried pulling the cable manually with a paid of pliers to no avail and have also given the wire a tug but didn't want to go too far in case I made matters worse.

 

I'm taking it in for a service in a few weeks but ideally would like to be able to access the bonnet before then!

 

Thanks,

 

Dan

[nzr350z]

I may be wrong but if you remove the drivers side front wheel then remove the plastic wheel arch liner you might be able to access the bonnet release catch.

[ZMANALEX]

I may be wrong but if you remove the drivers side front wheel then remove the plastic wheel arch liner you might be able to access the bonnet release catch.

 

You can only access the outer bonnet pull cable form under the R/H front arch liner and not the catch

[DP7657]

Hmm, that's less than ideal

 

Let's hope that Ross @ Japex can help me then!

 

Thanks

[HaydnH]

My brother had the same problem on a Fiat Supermirafiori, he finally fixed it when the engine seized from a lack of oil. DOH!

[DP7657]

Exactly my concern!

[Lee-Bmth]

Ironically, i read this last night, and would you believe it... exact same issue, yet to gain entry.... i did hear something as i started car, sounded like something moved... hmmm no rattles now, but bonnet not opening... if you do gain access, let me know lol

[350 Russ]

had this on my old astra. the cable stretched on mine and i fixed it by sitting on the bonnet where the catch was and bouncing whilst someone else pulled the handle, not sure if it will work on the zed but its worth a try.