nBradders Posted April 16, 2011 Posted April 16, 2011 Hi all, I've tried to fit a Kenwood DNX7240BT today and I've followed all the guides that are posted on here, I purchased the neccesary items i.e 29-674, 29-005 and whilst I've got power I have no sound I have the Birdview factory fitted sat nav and therefore the wiring is a bit chaotic back there but all the examples I have used from here are zeds without satnav so I'm wondering if I should be doing something differently? Do I need an extra part? Do I have to split wires? Help!!!! Quote
sparky370z Posted April 16, 2011 Posted April 16, 2011 Have u plugged the phono cables into the back of the HU. I did the same. The left side has a pair and theright have a pair. Quote
nBradders Posted April 16, 2011 Author Posted April 16, 2011 Have u plugged the phono cables into the back of the HU. I did the same. The left side has a pair and theright have a pair. The 29-674-C connector that I got from sextons has 2 cables, one with red & white plugs & the other with black & gold plugs. The HU has a lead with 2 plugs for front, 2 for rear & 2 for sub (all red & white) I've tried various combinations & no joy. Quote
Ian Posted April 17, 2011 Posted April 17, 2011 Have you connected the amp feed cable? Blue & white cable iirc. Quote
nBradders Posted April 17, 2011 Author Posted April 17, 2011 Have you connected the amp feed cable? Blue & white cable iirc. Maybe I should point out that I am not good with these things and maybe an all singing all dancing unit was a bit too much of a challenge for me to take on!! I've connected the blocks as per the guides. Checked again this morning and I can see a blue & white cable is part of the block so unless you are referring to a seperate cable then I would say yes it appears connected to me. Think I need to take it to someone who actually understands the wiring but the only audio place I'm aware of in Birmingham is Car Audio Direct who 1) got completely wrong what I needed and 2) provided me with the worst customer service I've ever experienced! Is anyone on here local or between Brum & Stoke on Trent and fancies helping me for several beers???? Quote
un1eash Posted April 18, 2011 Posted April 18, 2011 Did you connect the blue/white 'G' wire to the blue remote wire on the headunit? And have you connected the black wire 'H' to an earth? i bet this is what you've missed. Quote
nBradders Posted April 22, 2011 Author Posted April 22, 2011 Did you connect the blue/white 'G' wire to the blue remote wire on the headunit? And have you connected the black wire 'H' to an earth? i bet this is what you've missed. Cheers buddy, much appreciated! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.