evest Posted February 20, 2011 Posted February 20, 2011 The standard tyres are RE040's all round - not as good as the RE050's so perhaps the previous owner was in the process of upgrading? You have standard sizes on and I think standard PSI is 36 - there should be a little plaque on the driver door frame - if not the manual should have it. Quote
HassanZ Posted February 20, 2011 Author Posted February 20, 2011 The standard tyres are RE040's all round - not as good as the RE050's so perhaps the previous owner was in the process of upgrading? You have standard sizes on and I think standard PSI is 36 - there should be a little plaque on the driver door frame - if not the manual should have it. Oh that's good to hear! So at least I now know the previous owner was not cutting corners as he got a set of rear 050a's (more expensive) fitted onto the rear wheels 3 days before I bought it! This cost him £400 and I've also been given a receipt for the work carried out. I'm quite surprised he decided to fit on expensive tires knowing he was going to sell the car a few days later? What type of oil do you use and what manufacturer is it? Quote
evest Posted February 20, 2011 Posted February 20, 2011 I use 5w30 - this is the recommended SAE - personally I go for Silkolene Pro-S (it's now called Titan Race - same stuff). I buy from Opie Oils, you can get a discount for being a member on here! Brand is a personal choice, but go for fully synthetic - lot of info here: http://www.350z-uk.com/forum/viewtopic.php?f=10&t=11431&start=0 Quote
HassanZ Posted February 22, 2011 Author Posted February 22, 2011 I use 5w30 - this is the recommended SAE - personally I go for Silkolene Pro-S (it's now called Titan Race - same stuff). I buy from Opie Oils, you can get a discount for being a member on here! Brand is a personal choice, but go for fully synthetic - lot of info here: http://www.350z-uk.com/forum/viewtopic.php?f=10&t=11431&start=0 Thank you for your advice! At the moment it is running on millers fully synthetic so I got nothing to worry about at the moment. I will probably change the brand of oil after my next service. I will view the link you just sent me Quote
HassanZ Posted March 27, 2011 Author Posted March 27, 2011 As you already know, I've been having airbag light problems. I fiddled with the middle connector under the passenger seat then did the reset. The light went away for about a week before activating again. This time I thought I'd secure it properly and see if it helps, upon doing the reset again the light went for a few more days and came back on again! Any suggestion? This is really frustrating me now Thanks guys! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.