D0rzi Posted December 7, 2010 Posted December 7, 2010 Woke up this morning and only one window wiper was working.Went for a closer inspection and it seems i can move it and cant move the one that is working so im guessing something has snapped. Any idea no a price to fix this ? Quote
ChrisS Posted December 7, 2010 Posted December 7, 2010 Most wipers are fitted on a conicle spline. Can you tighten it down ? or has the spline gone ? If the spline has worn away,a stop gap would be loctite (then a bugger to get off later) or some insulation tape round the spline and re-tighten the nut. Quote
ZMANALEX Posted December 7, 2010 Posted December 7, 2010 Probably just requiring a tighten down. Just reposition the arm and tighten down the nut Quote
R35LEE Posted December 7, 2010 Posted December 7, 2010 If it's not the arm that has slipped on the spline it could be a rod has popped off under the plastic scuttle panel at the botton of the screen. Let us know what the outcome is. I have arms, motors and mechanisms sat here in stock if any are needed Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.