hulahoop Posted September 2, 2006 Posted September 2, 2006 Hi all, I'm at the nurburg ring and just taken her out for a 10 min lap and when I got back to the car park the engine warning light came on. let it cool down but still the same. done 2k since first service. ideas? anyone else done this :-) i've got a whole day tomorrow so hoping all is ok. she still revs freely no funny noises nada. Jules Quote
Sarnie Posted September 2, 2006 Posted September 2, 2006 Hi all, I'm at the nurburg ring and just taken her out for a 10 min lap and when I got back to the car park the engine warning light came on. let it cool down but still the same. done 2k since first service. ideas? anyone else done this :-) i've got a whole day tomorrow so hoping all is ok. she still revs freely no funny noises nada. Jules Brake fluid level low? Quote
lomoto Posted September 2, 2006 Posted September 2, 2006 try disconnecting the battery for about 30 seconds and see if this resets ECU Quote
steve_b Posted September 2, 2006 Posted September 2, 2006 check oil/water/power steering fluid. It is likely nothing but the traction kicked in too many times. If all okay do the reset thing with the accelerator pedal. Not easy but it does work. Steve Quote
Emperor Ming Posted September 2, 2006 Posted September 2, 2006 Check ALL fluid levels Driving a car at the edges of its performance like you do at a place like the ring uses all sorts of stuff that normal use does not. I would guess on oil level personally but anything is possible. Let us know what was low. Cheers Ming the Hopeful Quote
hulahoop Posted September 4, 2006 Author Posted September 4, 2006 Okay, back now and truely knackered. Checked all the fliuds the next morning and all were fine so I'm banking on traction control triggering something or a sensor going down somewhere. booked into nissan on thursday, will let you all know what they say. Thanks for your help, it was nice to be re-assured. Jules Quote
hulahoop Posted September 11, 2006 Author Posted September 11, 2006 The day before it went into Nissan the engine light decided it didnt need to come on anymore. And when they had a look there was no error code so it remains a mystery. but it still needs to go back for a replacement head unit (3rd) and replace aluminium trim on p/s vent (3rd). Quote
Sarnie Posted September 11, 2006 Posted September 11, 2006 The day before it went into Nissan the engine light decided it didnt need to come on anymore. And when they had a look there was no error code so it remains a mystery. but it still needs to go back for a replacement head unit (3rd) and replace aluminium trim on p/s vent (3rd). Why are they re-replacing your alu vent trims? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.