P15UL T Posted August 6, 2009 Share Posted August 6, 2009 Hi guys,ive been looking for the reset procedure for the airbag light, i keep my jack and tyre iron ect under my passenger seat and when putting it away the ither day i must have knocked some of the cableing under the seat, i have looked and nothing seems loose so hoping if i reset it all will be fine thanks in advance Paul Quote Link to comment Share on other sites More sharing options...
Chris`I Posted August 6, 2009 Share Posted August 6, 2009 http://www.350z-tech.com/zwiki/Service:Index Says it works for some, but not for others. Give it a go. I think some of the others had a procedure that worked when they did the interior swap. Quote Link to comment Share on other sites More sharing options...
chrisyboy84 Posted August 6, 2009 Share Posted August 6, 2009 Air Bag Reset Reset Proedure This procedure has worked for some people. Others claim it does not work, however it was pulled directly from the official Nissan Service Manual. So if it does not work for you, then there may be a problem with your airbag system and it should be checked out. 1. Turn ignition switch from OFF to ON. 2. Air Bag warning lamp is on for 7 seconds and turns off, the turn ignition switch OFF within 1 second after the lamp turn off. 3. After ignition switch is turned OFF, wait for more than 3 seconds. 4. Repeat steps 1 to 3 two more times. (Perform 3 times in total.) 5. Turn Ignition switch ON. 6. The SRS lamp has been reset it. I actually done it 4 times. But worked all the same Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.