GT4 Zed Posted February 19, 2009 Share Posted February 19, 2009 Hi people, Anyone out there with any pointers to fitting a V1 rear spoiler(ESR aftermarket item)? i got one which i plan to install on fri/sat. its all prep, primed and painted to match i have noticed the are 4 bolts on the underside 2 of which match with that of the OEM boot lip spoiler. Q1- is it necessary to drill for the other 2 bolts for proper fitting or would bonding/glueing be adequate on top of the matching 2 bolts (my concern is that if i wanted to revert the car to standard i will be left with 2 extra holes not covered by the OEM lip ) Q2- apart from the 2 bolts holding the OEM bootlip in place, is it bonded/glued down? how easy to remove? Q3- once the above is carefully taken off would there be any exposed parts on the boot that would need sorting if not covered by the V1 spoiler? or would machine polishing be enough without need for boot respray? i would be very grateful if you shared any relevant experience with this. i suspect CS would be THE man cheers[/b] Quote Link to comment Share on other sites More sharing options...
MITZ@CougarStore Posted February 19, 2009 Share Posted February 19, 2009 Bennet, you have a PM… Quote Link to comment Share on other sites More sharing options...
GT4 Zed Posted February 19, 2009 Author Share Posted February 19, 2009 Damn CS, you are quick no pm recieved yet Quote Link to comment Share on other sites More sharing options...
GT4 Zed Posted February 19, 2009 Author Share Posted February 19, 2009 got it now cheers bud. helpful as always pm sent Quote Link to comment Share on other sites More sharing options...
Ozz Posted February 19, 2009 Share Posted February 19, 2009 I did this on the weekend. I used a hairdrier to heat up the lip spoiler after undoing the bolts. After about 15 mins it came off easy. I started in the middle where it was a bit loose and carefully alternated between lifting and heating. Cleared up the residue with a degreaser, no damage to paintwork. Used double sided tape and the two rear bolts on the nismo spoiler and job done. Very easy! I think mine is a copy, but cost £100 and the colour matches the car so a result. Quote Link to comment Share on other sites More sharing options...
nurrish Posted February 19, 2009 Share Posted February 19, 2009 Still not got it on mate!!! talk about slack!!!! :lol: Btw isnt about time you showed off your fantastic sat nav Quote Link to comment Share on other sites More sharing options...
MITZ@CougarStore Posted February 19, 2009 Share Posted February 19, 2009 got it now cheers bud. helpful as always pm sent You’re welcome… Quote Link to comment Share on other sites More sharing options...
Trev-the-Rev Posted February 19, 2009 Share Posted February 19, 2009 Quote Link to comment Share on other sites More sharing options...
GT4 Zed Posted February 19, 2009 Author Share Posted February 19, 2009 Chill Trev, i will fit it between 2moro eve and sat so pics will follow. Thanks for your input Ozz. CS was quick to give me the low down Dave, sorry mate i don't have a decent camera down in plymouth but will get a post on the nav this weekend . you will be glad to know i have already done some extar modifications on it already Quote Link to comment Share on other sites More sharing options...
M13KYF Posted February 20, 2009 Share Posted February 20, 2009 sorry CS but don't understand why the helpful advice was pm'd Surely it would be helpful to future people in the same situation to have the guide posted, then this could be added to the guides Quote Link to comment Share on other sites More sharing options...
MITZ@CougarStore Posted February 20, 2009 Share Posted February 20, 2009 sorry CS but don't understand why the helpful advice was pm'd Surely it would be helpful to future people in the same situation to have the guide posted, then this could be added to the guides Mike, it was talked through over the phone with my workshop lad... I sent Bennet the direct number... Quote Link to comment Share on other sites More sharing options...
M13KYF Posted February 20, 2009 Share Posted February 20, 2009 sorry CS but don't understand why the helpful advice was pm'd Surely it would be helpful to future people in the same situation to have the guide posted, then this could be added to the guides Mike, it was talked through over the phone with my workshop lad... I sent Bennet the direct number... no probs mate. Just thinking for the future. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.