Suspension Geometry

[Adriank]

Does anyone know what the std setup is for this, and the tollerance ranges?

 

Think i need to get mine looked at since the Eibach Springs, i have a LOT of Camber and Toe on the rear wheels now.

 

Adjusters are also very expensive it seems, HELP!

[From A to Zed]

Hi Adrian,

 

I was given these by Big Phil and kept them in a safe place... I don't know anything about this stuff so I'm just regurgitating the numbers!

 

Camber:

Min. -1.33 Deg

Norm. -0.58 Deg

Max. +0.17 Deg

L/R Diff - 0.75 Deg

 

Caster:

Min. +7.42 Deg

Norm. +8.17 Deg

Max. +8.92 Deg

L/R Diff - 0.75 Deg

 

King Pin Inclination:

Min. +4.33 Deg

Norm. +5.08 Deg

Max. +5.83 Deg

 

Toe:

Min: 0"

Norm: 0.04"

Max: 0.08"

 

I hope this helps, maybe I'll get a sticky

 

Matt

[Adriank]

I had seen this posted before, but is this the setup for the front or the rear?

 

Surely the settings wil be different for each end, and that list looks like the full setup info for one of the ends?!?

 

Thanks

 

Adrian

[ZMANALEX]

I had seen this posted before, but is this the setup for the front or the rear?

 

Surely the settings wil be different for each end, and that list looks like the full setup info for one of the ends?!?

 

Thanks

 

Adrian

 

Adrian,

 

Send me over your email addy and I will send over all the data that you need mate.

 

Alex.

[Martin W]

I had seen this posted before, but is this the setup for the front or the rear?

 

Surely the settings wil be different for each end, and that list looks like the full setup info for one of the ends?!?

 

Thanks

 

Adrian

 

Adrian,

 

Send me over your email addy and I will send over all the data that you need mate.

 

 

 

Alex.

Wanna sticky that Alex?

[Daaave]

When you go to a place to have your geo done they should have all the settings in the machine, but just in case:

 

350z, 18" wheel (better systems automatically compensate for different wheel sizes by taking measurements when rolling the car back and forth).

 

Rear Axle

Camber -1°35' ± 0°30'

Toe 0°05' ± 0°02'

Total toe 0°09' ± 0°04'

Setback 0°00'

Geometrical driving axis 0°00'

Axle offset 0°00'

 

Front Axle

Camber -0°35' ± 0°45'

Caster 8°10' ± 0°45'

SAI 5°05' ± 0°45'

Toe 0°02' ± 0°02'

Total toe 0°05' ± 0°05'

 

I've been told by lots of people in the past that it's best to go to a place that uses Hunter alignment systems. They can be found on http://www.alignmycar.co.uk/.