M350ZB Posted September 25, 2008 Posted September 25, 2008 Passenger silver interior door grab handle (to pull door shut) Got a stratch on mine and i know its only a small thing but doing my head in? Drivers door window seal Mine is slightly coming loose from the bracket piece that attaches it to the edge of the door ? Anyone got any of these or know of anywhere i can get hold of some, never seen none come up on here! Any help much greatfull, Thanks guys Quote
M350ZB Posted October 14, 2008 Author Posted October 14, 2008 Anyone got any of this lying about or ? ? ?, any traders ? ? ? Quote
Chesterfield Posted October 22, 2008 Posted October 22, 2008 Hi JAS and welcome. Please could you contact one of the team for instruction on how to become an official trader if you wish to sell items to members. Regards, 350z-uk.com team. Quote
R35LEE Posted October 22, 2008 Posted October 22, 2008 Anyone know what these cost new from Nissan? Also have you tried removing it, sand in direction of brushed effect and re-lacquer? They are easy to remove you just pull it out from the top (I used a trim clip puller with elec tape so as not to damage the trim. If your unsure look up door trim removal guide. Quote
M350ZB Posted October 26, 2008 Author Posted October 26, 2008 going to ring nissan tommorrow for a price on the driver bottom window seal, the piece that attahces to the door (top of door), and the window glass goes between, cant find no prices on web, also bigphil is going to try find out for me, as my car is up there now Will keep ya informed, and also try and get the price for the silver grab handle. Anyone ever had to buy either of these ? Quote
Stew Posted October 26, 2008 Posted October 26, 2008 Also try Envy, Chris at JDM performance for this. You could also ask Zmanalex if he can get a hold of them! Also MJP...... There are loads of people that can get Nissan parts. Quote
M350ZB Posted October 26, 2008 Author Posted October 26, 2008 Also try Envy, Chris at JDM performance for this. You could also ask Zmanalex if he can get a hold of them! Also MJP...... There are loads of people that can get Nissan parts. cheers buddy Quote
lomoto Posted October 26, 2008 Posted October 26, 2008 The passenger door pull trim is easily polished, I had a scratch on mine Quote
M350ZB Posted October 26, 2008 Author Posted October 26, 2008 How did you remove it lomoto ?, was it easy ? ? ? Quote
lomoto Posted October 27, 2008 Posted October 27, 2008 How did you remove it lomoto ?, was it easy ? ? ? Dead easy , just take the top finish off with some very fine wet/dry paper (2000 grit ) then polish off with Autosol Quote
M350ZB Posted October 27, 2008 Author Posted October 27, 2008 And how did you remove it from the car please buddy ! ? Quote
lomoto Posted October 27, 2008 Posted October 27, 2008 And how did you remove it from the car please buddy ! ? To be honest I cant remember it was that long ago that I did this Quote
Chris`I Posted October 27, 2008 Posted October 27, 2008 Its in the service manual. Carefully stick a small flat blade screw driver in between the top of it and the door and pry it backwards and down Quote
M350ZB Posted October 28, 2008 Author Posted October 28, 2008 Going to call around see if i can source one in, if not looks like ill be trying to give it a go my self ? Quote
M350ZB Posted November 3, 2008 Author Posted November 3, 2008 found out from good old bigpihl, the side outer window trim is like £100 + from nissan , jesus, Quote
R35LEE Posted November 3, 2008 Posted November 3, 2008 Hi mate, you should really give sorting yours a go! Are the marks on yours only scratches or dents? Failing that I have one already done but I wouldn't waste your money unless yours is beyond repair. You want a picture on how to remove it? Quote
M350ZB Posted November 3, 2008 Author Posted November 3, 2008 Hi mate, you should really give sorting yours a go! Are the marks on yours only scratches or dents? Failing that I have one already done but I wouldn't waste your money unless yours is beyond repair. You want a picture on how to remove it? Yeah go for it mate, when i get the car back ill see what i can do ? Quote
Chris`I Posted November 3, 2008 Posted November 3, 2008 What not see if Phils lot can do it? Cant be hard for a body shop to strip it and give it a coat of laquer if they are doing other stuff for you? Quote
RobD7 Posted November 3, 2008 Posted November 3, 2008 What not see if Phils lot can do it? Cant be hard for a body shop to strip it and give it a coat of laquer if they are doing other stuff for you? +1??? Quote
M350ZB Posted November 3, 2008 Author Posted November 3, 2008 Will give them a bell tom, , and see what he can do !!!! Quote
Chris`I Posted November 3, 2008 Posted November 3, 2008 Sorry Phil, giving you more hassle. I'll keep quiet next time Quote
RobD7 Posted November 3, 2008 Posted November 3, 2008 Sorry Phil, giving you more hassle. I'll keep quiet next time Quote
M350ZB Posted November 4, 2008 Author Posted November 4, 2008 Sorry Phil, giving you more hassle. I'll keep quiet next time Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.