prometheus Posted June 28, 2008 Posted June 28, 2008 Guys I have read the procedure about resetting the ECU via the pedals etc. but does anyone know if it can be done with an OBD11? Would prob be quicker and easier to do if it can. Quote
Ian Posted June 28, 2008 Posted June 28, 2008 yes it can. You can get a reader & software off ebay. I have the Digimoto software http://www.digimoto.com/ Quote
prometheus Posted June 28, 2008 Author Posted June 28, 2008 Cheers I already have one but can't remember the make of it, my father has it at the moment so must grab it back of him and check it out. Quote
TT Convert Posted June 28, 2008 Posted June 28, 2008 hmmmmmm I have an odb2 from my audi TT days, had no idea I could use it on my zed, were is the socket? Quote
prometheus Posted June 28, 2008 Author Posted June 28, 2008 Good question, usually they are around the drivers bay, all cars in the EU have to have the OBD(On Board Diagnostic) compliant since 2001. Quote
TT Convert Posted June 28, 2008 Posted June 28, 2008 ok, so now I know there is one somewere, can somebody tell me were and how to reset the ECU Quote
Ekona Posted June 28, 2008 Posted June 28, 2008 yes it can. You can get a reader & software off ebay. I have the Digimoto software http://www.digimoto.com/ You sure? I know you can reset the CEL, but have yet to meet an OBDII car where you can reset the ECU as well from the diagnostics port. I've had my Gendan reader + laptop connected to my brother's MY07 Zed and didn't see anything remotely like an ECU reset button/option. Quote
Guest prescience Posted June 28, 2008 Posted June 28, 2008 ok, so now I know there is one somewere, can somebody tell me were and how to reset the ECU I'm not certain the VW/Audi readers are compatible with the Z - Iseem to remember there being 2 types when I bought mine Quote
TT Convert Posted June 28, 2008 Posted June 28, 2008 I know on my audi I had to disconect the battery for an hour and leave the drivers dorr open and the bonnet reconnect, do this do that do the other and it didnt wipe it but rest it to satrt learning again BUT WERE IS THE SOCKET ON THE ZED???? Quote
Ian Posted June 28, 2008 Posted June 28, 2008 yes it can. You can get a reader & software off ebay. I have the Digimoto software http://www.digimoto.com/ You sure? I know you can reset the CEL, but have yet to meet an OBDII car where you can reset the ECU as well from the diagnostics port. I've had my Gendan reader + laptop connected to my brother's MY07 Zed and didn't see anything remotely like an ECU reset button/option. Yup pretty sure, Will double check when I get my car back later Diagnostic port is around by the bonnet release Quote
prometheus Posted June 28, 2008 Author Posted June 28, 2008 Yep spotted that, exact same connector that was on my old 2000 Celica. Will have to try the OBD later to see if there is an option for resetting the ECU. How then does dear old Mr. Nissan reset it? They must be able to do it via the OBD as it is alot quicker than the other methods. Quote
Guest prescience Posted June 28, 2008 Posted June 28, 2008 Yep spotted that, exact same connector that was on my old 2000 Celica. Will have to try the OBD later to see if there is an option for resetting the ECU. How then does dear old Mr. Nissan reset it? They must be able to do it via the OBD as it is alot quicker than the other methods. Nissan Consult Quote
Guest prescience Posted June 28, 2008 Posted June 28, 2008 What's that when it's at home? Nissan's all singing proprietary diagnostic tool Quote
prometheus Posted June 28, 2008 Author Posted June 28, 2008 Ok thanks. Don't remember seeing the option when I had it connected to my Celica about resetting the ECU, so won't be holding my breath. Quote
TT Convert Posted June 28, 2008 Posted June 28, 2008 OK CAN SOMEBODY TELL ME WERE TO GET SOME GOOD SOFTWARE AS MY GENDEN SOFTWARE FROM THE AUDI WONT CONECT TO THE CAR Quote
Ian Posted June 28, 2008 Posted June 28, 2008 OK CAN SOMEBODY TELL ME WERE TO GET SOME GOOD SOFTWARE AS MY GENDEN SOFTWARE FROM THE AUDI WONT CONECT TO THE CAR Digimoto.com Quote
TT Convert Posted June 28, 2008 Posted June 28, 2008 and does it work with a normal obd2 cable? Quote
Ian Posted June 28, 2008 Posted June 28, 2008 Id assume so. Ive got a different cable to the one that is sold on their site so can't see any reason why it wouldnt work Quote
TT Convert Posted June 28, 2008 Posted June 28, 2008 and does it give you the function to reset the ecu? Quote
Ian Posted June 28, 2008 Posted June 28, 2008 Pretty sure it does, I will double check when I get my car back this afternoon Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.