Willbof Posted yesterday at 12:58 Share Posted yesterday at 12:58 Coming towards the end of my restoration and I've got an issue with the brakes. New pads and discs fitted but when I turn right the abs kicks in and gets to lock the wheel up, quite scary! I've pulled the hub and sensor to take a look. Sensor looks fine but the hub has some weird marks on the abs ring. Assuming this is the issue I've ordered freshies but just wondering if anyone has seen such an issue? I'm not sure what cas causes the marks either 🤷🏻♂️ Car turns fine with abs disabled btw. Quote Link to comment Share on other sites More sharing options...
mr v6 Posted yesterday at 16:01 Share Posted yesterday at 16:01 I take it you've scanned it to verify you're on the right corner? Does look knackered that though. Quote Link to comment Share on other sites More sharing options...
Willbof Posted yesterday at 18:26 Author Share Posted yesterday at 18:26 Ye, zero codes though and drives normal when it's straight/gentle cornering. Just kicks in abs when I turn right Quote Link to comment Share on other sites More sharing options...
zeditis Posted yesterday at 19:43 Share Posted yesterday at 19:43 As far as I'm aware abs does not apply brakes but the stability control will. Quote Link to comment Share on other sites More sharing options...
Willbof Posted 16 hours ago Author Share Posted 16 hours ago Hmm, so do you know if the stability control works solely from the yaw sensor or would the wheel speed have an input? Quote Link to comment Share on other sites More sharing options...
ZMANALEX Posted 13 hours ago Share Posted 13 hours ago What wheel is locking up on right turn? Is the wheel locking up without applying the brakes? All parts are in stock to fix this issue. Hubs, ABS sensors, yaw sensors. etc. etc. etc. Quote Link to comment Share on other sites More sharing options...
Keith D Posted 7 hours ago Share Posted 7 hours ago (edited) 8 hours ago, Willbof said: Hmm, so do you know if the stability control works solely from the yaw sensor or would the wheel speed have an input? Stability control will be a constant calculation using yaw rate, steer angle and wheel speed. It will intervene if it detects oversteer or understeer by applying brakes and cutting engine power. Can't answer for specifics on zeds, but that's the general idea. Edited 7 hours ago by Keith D Quote Link to comment Share on other sites More sharing options...
mr v6 Posted 6 hours ago Share Posted 6 hours ago I'd put it on a diagnostic tablet & graph all 4 corners on a screen, the graph will show you which (if any) are dropping out. My Launch does this, very handy indeed. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.