spike4real Posted February 26, 2017 Posted February 26, 2017 Hi all, I've noticed my passenger window is not dropping very much (maybe 2mm at most?) when opening the door. This causes the glass to catch and fold in the rubber seal which leads to a small leak when it rains. I've just ran through the reset procedure but it didn't make any difference. One thing I read after trying the reset is that the battery needs to be disconnected for 1-2mins before you do it - is this necessary? If so i might try it again while its dry. Failing that does it sound like a window motor issue? Thanks Dan Quote
spike4real Posted February 26, 2017 Author Posted February 26, 2017 The reset procedure i followed was... - Remove door card - Close the window fully (not using auto-close) - Close the door (or keep door sensor pressed) - Press & hold the motor reset button - Open the window fully (not using auto-open) - Release motor reset button - Open the door (or let go of door sensor) - Reinstall door card. Quote
ZMANALEX Posted February 26, 2017 Posted February 26, 2017 On the Roadster I have only had to disconnect the battery if the reset does not work. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.