Jump to content

Help needed identifying a part!


Loggy747

Recommended Posts

Hi all, i just had a Wasso plenum spacer arrive at the weekend so while I was fitting it I thought it would be a good time to change the plugs as well. If you are looking at the engine bay from the front of the car there is a fuel line which goes to something which is bolted down with two 10mm bolts to the left side of the plenum. I had to take this off to get at the top left coil pack. However when I was removing it, I must have damaged the o-ring seal 😔. Then when I put the car back together petrol started squirting out of it. I tried another seal I had in the garage and it worked for a while before starting to squirt again. Can anyone identify what it is so I could order the proper o-ring?

 

5713cd4d06bc5c748345ba88a15ebf33.jpg

 

3e84448398daf539c573bfeb536e8cbf.jpg

 

Sorry I couldn't get a closer photo, I'm off to the airport and forgot to take one this morning!

 

Cheers,

 

Orran

 

 

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...