Fault Code P1283 - help needed

[samu23]

Hi All

 

I have a recurring EML fault code of P1283, which seems to come on after about 30 minutes of driving after being reset.

 

I have done a search and found a few threads on here and online of people having a similar issue but none of the threads have had solutions added.

 

A little bit of background:

 

- Recently fitted a pop charger

- The car struggled to pass its MOT on emissions - the mechanic said the fuel trims were running at 100% at times.

- The car seems to drive ok with no loss of power or limp mode

 

From this site it looks to be one of the A/F sensors, is it a case of replacing it and see if the issue comes back?

 

http://www.autocodes...283_nissan.html

 

I'm new to all this so any help would be much appreciated.

 

Thanks,

 

Sam

Edited April 10, 2016 by samu23

[ZMANALEX]

Sam,

 

Refer to the data in the link in your post above, however replacing the front sensor on bank 2 is usually the fix but not always.

 

Alex.

[samu23]

Thanks Alex.

 

It's going in for a service on Tuesday so hopefully they can sort it.

 

I have only been driving it gently since, would you say it's ok to drive until I get it sorted.

 

Looks like it's running lean which could be dangerous?

 

Do you have any sensors in stock? If so can you pm me a price?

[ZMANALEX]

PM on its way.

[fijifixit]

@samu23 Sorry to revive an old post, did you ever manage to sort this issue out? I've had P1283 on for a while now. I got it checked out and was told Bank 2 fuel trims were quite high and that it was a vaccum leak somewhere.