Darren-B

i found the best way was 2use an impact gun, not a wrench, as they tend 2twist when under load, leaving you with rounded nuts:blush: If so u will need a bleeping machine, 18mm socket and a club hammer. Good luck mate

it got the point where i thought i was going 2have 2drill them out and replace the hubs, oh well we learn from our mistakes, dont use spacers get bigger wheels

Correct me if im wrong, but i beleive that you will get a power gain with less back pressure when running FI but a loss if NA

When you replace it again ensure that your fingers do not come in contact with the glass surface, this can considerably reduce the life of both xenon and halogen bulbs

Would love to do this but a 230mile drive home on bald tyres is probably chancing it a bit

Or Vicky, she loves the 350:teeth: And I love her

Ouch

Got my tyres fitted today, Had a great deal of trouble with the sodding Eibach spacers, Poor quality nuts supplied ment they just rounded off when trying to re-move them. When i fitted them i ensured that they were Torqued to the right setting but there S***. Wrecked 6 sockets getting them off. Will post up some more when I get some daylight

Its probably just all the dirty water and salt, splashing up onto the exhaust, and brakes, see if it does it in the dry

If you taking the calipers off the disc to check, be careful as it is quite easy to pop the pistons out if theres nothing for them to clamp to, then you will have a problem, speaking from expeirence:blush:

I have a few chips in the paint of my BREMBO`s Just wondering if anyone had any info of the paint code or specific name for the colour?

I was just talking about this to a few mates in the pub, Count me in for this

Some stops for photo shoots would be good too

Im sure others will have some suggestions on planning the route,

Just had a quick play on google maps, Included Dartford and limehouse link (speed cameras in here though), I dont really know of any others off the top of my head. Open for suggestions http://maps.google.co.uk/maps?f=d&saddr ... 5&t=h&z=14

8th Feb is 1. M350ZB 2. DARREN-B

OK, im quite tempted but a little concerned about weathering. Has you any left?

Please dont swear on this thread (ELITE)

OK then Mark, You started this thread quite some ime ago. I think you should set a date now:teeth:

Nice, are these the wheels?

I wonder where i got that idea from then?

Mark, is this Ali or Steel?

Mark if your the designated driver on the 31st you should have a hangover the next day

Dont the GT4`s have bigger AP Racing brakes? I have a late 2004, I have done 15k in it now, never had to put a drip of oil in it:teeth:. I had a TT couple of years ago used to do 1-1.5ltrs every 1k:scare:

CAMSKILL are ok but the prices are supply only and you have delivery and fitting costs on top. I can get my tyres supplied and fitted for their supply only price