M350ZB

Sounds like a good idea bud, look forward to seeing some pics

cheers bud, they look awesome

You can get yours at Wales. Means you have to come Sounds good to me bud , you can fit them If you're having internal stickers, bring some Windowlene and a MF cloth, can stick em on easier that way. Never done it before, but I hear it makes it dead easy as you can move them around a bit with Windowlene will do bud

What are the stock rays bud ?, and how comes then some companies have a smaller profile at the rear

No not lowered or nothing

You can get yours at Wales. Means you have to come Sounds good to me bud , you can fit them

Where did you get the z caps from or are they decals ?, looks ace mate

Might be worth putting the car back to OEM and selling the moded parts as such

Bit confused with tyre sizes, e.t.c, and off-sets ....... would 20" wheels compared to 19" wheels, bring my ride height up at all ? Currently have BBS 19" wheels, which are > Front > 245/35/19 Rear>275/35/19 And im not to sure on the offset ,anyone know ? I have done the following calculation to work out the distance (mm) from centre of wheel to ground> 19" is approx 485mm, diveded that by 2 to give 245.2, then i have added the 35 mm tyre profile, giving me a total of 277.5mm, this being from the centre of the wheel to ground. Right now the confusing bit, i have seen a set of wheels i like but they have a smaller profile on the rear compared to the front, they are 20" and are as follows > Front>245/35/20" Rear>285/30/20" Is this correct ? If i do the same calculation above with the 20" wheels and 30mm profile, it works out as follows > 20" is approx 505mm, divide that by 2 = 252.5mm, then add the 30mm profile, gives you 282.5mm So then 20" = 282.5 take off 192 = 277.5 will give me a 5mm height increase, does all this make sense and can any one shed any light on this for me ?, Another thing, im thinking will the 20" wheels and them tyre sizes fit in my arch's or will there be a bigger gap, any advice, much greatfull guys and girls. Thanks

Id like two silver (blade) ones plz Ones that go inside

:lol:

They look the muts

O thought it would, thinking of it, roast's new weheels think they are odd sizes ...........

No need to be like that

Who had it? Hes on the forum, im sure he will post in the next few days ??????????????????????

:lol:

Nice Zed , some good pics

Yeah did check everything out and all ok nothing loose, or hanging off or nothing. I know that what i was thinking today about the code. The only real engine mod it the induction kit (pipercross) and this was done ages ago, apart from that all i have done is engine cover modz and fitted the strut bar, but done the tunnel run no probs, not to sure with this one

:lol:, if they do, group buy

+1

:lol:

Top work bud, looks spot on

LOL Ive just had a 2nd look - 35 profile on the front and 30 profile on the rear, maybe thats why it appears to be slightly higher at the rear. 35 on front, 30 on rear, does your T/C kick in ?

Cool i recon there could be quite a good demand for custom decals like this. R +1 on that

Cracking pics and 35 profiles, bit different, norm 30's i thought !