Jump to content

steve_jones

Members
  • Posts

    132
  • Joined

  • Last visited

Everything posted by steve_jones

  1. Had a good day on Saturday (biying that programme was a genius plan !! ) Good to see the drifting and the madd jet Quad bike !! I though the pink zed broke a half shaft, not the main drive shaft, it looked very metal like to me ! All good fun !! Steve
  2. You can use a nissan Micra 4 speaker iso harness , If you system in none bose Steve
  3. They do fit, straight connection, no problemo ..... Steve
  4. Dead easy , got the nissan Sat nav housing , then just dropped it in , bit of wiring, and your done
  5. If you ring them on 0115 924 0666 , im not sure of the guys name, Sorry steve Sounds like the above system effectively. The PAC SWI-ALP is also a 3 wire jobbie and it's what 350Z owners in the US are using. You didn't mention who I should contact?
  6. This is the Dash Kit you need American international ND-K740
  7. Its neither This is a fully wired interface box, it has 3 wires and a power connection. I was in my local Car electronics store a few months ago and they had a 350 in doing a full install, and they were telling me they were liasing with a company in the UK developing the interface box . So I went in yesterday and asked them , and they had cracked it, and had 1 left , so I had it, If you speak to them they may be able to get more ( as all the r&d is done now ) It cost me £50 Steve
  8. Its an American International Dash kit ND-k740 These should work http://search.ebay.com/nd-k740_W0QQfromZR41QQsatitleZndQ2dk740 Steve
  9. Very inpressed, got a custom control box installed so it can interface with my Steering wheel controls as well ..
  10. Mine are just polished , and laquered , Cant find a link . will keep looking Steve
  11. I did a little test area 1st on the back Mine are laquered and were fine ... Steve
  12. And what is this miriacle product I hear you ask ...
  13. Ive been attempting this for a few weeks now, tried several products with little effect . I then saw an advert for Product X on Tele so thought I would give it a try ... To say I was impressed is an understatement .. check out the pics... Before..
  14. Sorry, Stands fine by me ( would I have to pay it all even if i was only going for 1 day ? ) steve
  15. I may only be able to make it for one day for this event, probably Sat ( or sunday if its raining ) I wont need accomodation as im only 10 mins away Steve
  16. If you have none Bose, your good to go the speakers are normal 4 ohm Jobbies, I would also get an Amp that can take high level inputs ( ie your speaker wires ) and use that to drive the Speakers, you can also get interface box`s that convert the high level outputs from your stereo to RCA level signals, and then feed those to a normal Amp Steve
  17. Cant read it says im not aloud , what happened? Steve
  18. Sounds loads Better, I have invested in a can of tyre foam, AA Card, and some good Luck ! Now What project next...... Steve
  19. Cheers Its only taken about 6 Months so far I Did "Most" of it myself, I had a freiend make me the Box`s as im no good with fiberglass and hees an expert Just need to get the amps setup now, do some perspex in the windows and maybe some funky lights somewhere .... Steve
  20. Apologies for the quality of the pics, will get better ones at the weekend
  21. I think it will be designed to go with any turbo kit, with a bit of custom piping depending on what you have got ! It looks like a Turbonetics single on there development car though ! Steve
×
×
  • Create New...