JAllen28

I asked him to check to see if anything was bent and he said he couldn't see anything. Just been for a drive and it does pull left and right depending on which side of the road I'm not but seems to pull left a lot easier.

Seems to be pulling on every road I go on but will definitely try that and see. Thanks!

Wasn't sure where to put so I do apologise if its in the wrong place. A couple of months a go I hit a curb while going sideways (standard) and it knocked the alignment out. I had to wait to get the alignment done for a couple of weeks as I needed the car for work so was driving a bit wonky. Got the alignment done and there was definitely an improvement but it is still pulling left. Could this be down to tyre wear or damaged wheels? I am about to order some work wheels and new tyres, am I better off driving around with it pulling a bit and then when I get the new wheels and tyres chuck them on and get an alignment and see where its at? Any advice is appreciated.

Got ya, it all makes sense now Thanks for helping out mate, I know exactly what I need now; 18x9.5 ET20 245/40 18x10 ET15 265/40

Sorry to sound stupid but what would be the effect of going for a higher rear offset looks wise with a 265/40, more poke? I'm aiming for flush fitment.

As long as it will look good and have no issues with rubbing once its lowered I'll go with Chris's recommendation I reckon. Thanks for your help though

Been speaking to Chris over at tarmac sportz and he has been a massive help!

Thank you mate, have you got any pictures? speaking to Chris at tarmac sportz I think I’m gonna go with the below Front 18x9.5 ET20 with 255/40/18 Rear 18.10 ET15 with 265/40/18 What would be the reasoning behind our different offsets on the rear?

Okay thanks mate! And those tyre sizes would be good if I dropped 30mm? Also I assume I won't need to extend my wheel threads? Just asking as with my current wheels thats what im going to have to do and don't want to.

18"s and tyre can be flexible as I'm need to buy new tyres anyway so whatever suits best. I assume 9.5J would be 255/45 front and 265/45 rear? 8.5J front would would be a 235/45? Thanks

I am about to fork out some Rota Grids to would appreciate some feedback from some people more knowledagble than myself. I have a GT edition with brembo brakes and what to know what offsets I would require to 1. fit over the brakes and 2. have perfect fitment once lowered either 17mm eith Teins or 30mm with others. Front 8.5J what offset? Front - 9.5J what offset? Rear - 9.5J what offset? My current wheels require a 10mm Spacer but it means I have to extened the wheel studs, something I really dont want to have to do. Can someone confirm what offsets I would require for the above with no spacers and no extension of wheel threads! Thanks

Have you got anything for sale that drops 20mm? Just thinking 14mm with Teins on the rear is not gonna be enough. Thanks

Would I be able to get away with 30mm drop on the front, rear should be sbolutely fine. For Reference wheels are 18x9.5J ET30 with 10mm Spacer. Pics below. Front Rear

Evening All, Was fitting my new wheels earlier today and the front wheel threads were 12 x 1.5 (were deffo 1.5 as it said it on the lug nuts) and rears were 12 x 1.25 (Standard) Anyone know why my front has 1.5? Need to now buy new lug nuts, anyone know anywhere where I can get backs of 10 so I'm not wasting my money? Cheers!

Evening everyone, Anyone had any experience with the above springs that can comment on quality? My next question is, I’m running 18” Rotas with 10mm spacers on the front, would 30mm be to much? And last questions is, is there any good in between the Tein 14mm rear 17mm front and 30mm all round that anyone knows of, without going to coil overs? Cheers!

Morning Everyone, I am pretty decided on an AMS GT kit for my Z but so far the only place I can find one in the UK is HZ Dynamics. (https://www.hzdynamics.co.uk/body-kits/nissan/350z/ams-type/05-09-audi-a4-b7-4dr-saloon-rs4-type-wide-bodykit-378.html) Does anyone know of other sellers in UK and has anyone had any experience with this kit themselves? Cheers!

Can pick up today.

I will also take these if not sold, can pick up from Henley as I only work 20 mins away.

Just between Oxford and Reading, my local meet is Reading Gate Jap Meet

Cheers Everyone, appreciate the kind words.

Hi all, Picked up my first Z on saturday and couldn't be happier. I'm planning on putting some Work Emotion T7Rs on so undoubtedly I will have some questions on Offset and sizing that I'm sure someone can help me with. Might see some of you at some meets.

Anyone know where I can get the Voltex bumper lip that fits on the OEM bumper. Thanks

After the above