danielb186

Im from the northeast but have no idea wheres the best place to take the car. :/

Doesn't that one also cut the spedo though? 

Also how much is it to get that mapped on? I also need cruise control activating on my ecu 

Thinking about it im a drifter so I need to left food brake so line lock wouldn't work for me. :/ I'll have to wire in a switch the the brake light fuse.

Ive heard you can get that mapped in? Ive never looked into line lock so I'd have no Idea where to start with it?

Hey guys, any idea where to find a replacment trim from the picture?

Just the light grey one, after all those lights came on i assumed I got the right one didn't realise about the burnout issue. I will wire that light gret plug to the traction control switch in the car, then Ill add another switch for the brake light fuse and hope that solves my issue.

Ok ill try and find it 

Oh that makes sense...  Any idea where the fuse is? I may wire a switch to that too so I can turn it off to do a burnout then turn it back on

@Lurch @OnlyAfro hey guys so after I've disconnected that plug and all the lights came on i tried to do a sitting burnout.. It didn't go well I reved the car up to about 4.5k dumped the clutch went straight over to the brake, and the car just bogged down and tried to stall. I tried using less brakes but still does the same thing.  Is there something I'm missing??

Worked perfect guy's thank you!!! 

@ZMANALEX any idea what this is? Its near my pedals

@ZMANALEX here are the images

The first picture is the sensor on the clutch and the last 2 are on the brake (same sensor)

I had a look can someone advise me which plug it is? I think its the bottom one in the first picture? Also its connected to a metal bracket with very little access any idea how to get at it?

by the way, any idea which wire is best to add the switch too? I believe grounds are normally best =D

@OnlyAfro Thank you for your help I'll wire a switch in later =D I used to having a daily drifter so I miss being able to "have fun" when I want to 

27 minutes ago, OnlyAfro said:

Not sure on the difference between years, but there's a connector on the ABS module (near brake fluid res) that you can unplug to disable all stability aids. Install an inline switch into one of those wires and it should sort you out.

Will this disable everything? TSC,VDC and ABS or will I need to do the yawn switch as well? Also any pictures so I know what I'm looking for?

Hey guys, so I have a 2004 350z, It didn't come with cruise control, can anyone recommend a decent tuner in the northeast to flash the correct software onto my ECU? (I have all the switches ready) 

Also, I have been looking into the TSC and ABS delete now I've figured out that the "G sensor" under the center dash controls the TSC so I need to add a switch to the earth so I can turn it on and off is that correct? The other Thing I'm struggling with is the ABS, now I'd really like this on a switch (I have my reasons why I'd like it this way) but the only way I've seen how to do this is the multi fuse near the battery, people have said add a switch through that but I'm unsure how that would work? Any advice? 

Thanks in advance. =D

Also interested if this worked.

Hey, guys so I've recently bought my dream 350z! Unfortunately, it doesn't have cruise control. I have looked into the topic and figured out I just need to install the switches and reflash the ECU. After looking my car already had the pedal switches but not the steering wheel ones. Easy enough to source I assume? Also, can anyone recommend a decent tuner who can reflash the ECU to activate cruise control? 

Hey guys, Just got myself a 350z! I have to say this is my dream car and I'm stoked to have it! I thought I'd say hello. =D