Lex300

Hi im after a complete airbox with velocity stack inside i think there off a late 2005 or 2006 and can be posted thanks. I dont have a factory airbox thats why im after the complete airbox. Have put a picture up its the one on the right.

Main battery the workshop manual just says lower the windows but not sure if I'm supposed to lower all the way down.

Hi can someone confirm when changing the battery i need to drop the passenger and drivers windows down . Do the windows need to be right down? . And after the battery has been changed does the windows need resetting or will they be fine as they move when the door is opened and closed slightly. Thanks

Does anyone know where i get get some brembo touch up paint. Ive read back on some posts from 2014 saying humbrol 54 . I brought some of this in fact 3 tins from different places thinking i must have a bad batch. And the colour is nowhere near unless humbrol have changed the colour. The picture is a google image with the caliper and has the correct or close too colour saying humbrol 54 im not sure how old the picture is of the caliper . The paint i got all three tins of humbrol met 54 is a yellow greeny gold brass ive mixed it up a lot still not even close. Any help appreciated.

Its normally white grease you sometimes get with the bushes. Just grease the inside of the bushes . Ive found some on ebay. Or search poly bush grease. Look at this on eBay http://www.ebay.co.uk/itm/142461380863

Could be banana arms ive read people having issues with noises . Regarding your pro sway bar bushes did you put any white grease around the sway bar or inside the bushes before you fitted them. If not the anti roll bar could be moving on dry bushes causing the squeek. My brother had this issue when he fitted new poly bushes on the anti roll bar put some white grease inside the bushes stopped the noise.

Yes sorry bought the 350z . It was early hours this morning when i posted this falling asleep lol.

My other run around and now bought the 350z did have a mk4 supra gutted i sold it so cheap with the prices now

Thanks for the input zman i will leave that idea then . I did find a nice one in the states a saikou michi catch can kit for the 350

Ah ok i just seen them on cars thats all

Has any one used this type are they anygood .

davey where did you get yours from ive been looking at baffled cans but cannot find one with a gauge level.

So am i best just to run one catch can any recommendations i was looking at the compact mishimoto ones. A lot of tuning videos and usa guys run option one as they said its stops the oil going into the engine and causing messed up fuel to air mix buring with oil and the oil can cause engine knock with oil going into the cylinders.. its only what ive been finding on the web. So i just making sure i buy the right set up. Thanks

Hi guys looking at some advice on oil catch cans . Ive read around the forum and on youtube and there seems to be a few options in set ups and some agree and disagree opinions on set ups I want to put a setup on my car just to prevent oil collecting in the plenum and to stop if any oil consumption. 1.I seen one set up on youtube with pcv valve deleted then both pipes going to a vented catch can and blocking the plenum and intake off. And his findings was no oil in plenum and very low oil consumption. 2.Ive read on the forums here one having two closed baffle catch cans going to each pcv valve and plumbed in as normal to plenum and intake 3. Ive read you can leave the intake side and just put a catch can on the drivers side. . Which is the best option to fit and forget to minimise or stop oil consumption and oil pool in the plenum. Thats is safe todo and wouldn't cause a problem. Thanks

Ok so im best to have ac on does this drastically drop the mpg or is it not to bad. My first 350z so just learning things . Thanks

Hi guys can someone confirm if this is normal idle seems low and i can feel the engine shake through the car and i can sometimes here a pop out the exhaust . If i bring the rpm up slightly with the peddle its fine just under the 1000rpm. But as i let of drops down im not sure what the rpm scale is but is that below 500rpm on the picture. With the aircon on it brings it up between the 1000rpm mark and the one below. But didn't want to run ac as it uses more fuel correct?

Thanks davey would you recommend changing to a braided line and change the slave cylinder. I see people wrap some sort of heat shield sleeve around the pipe..

Hi guys been reading around about clutch pedals sticking to the floor mine doesn't do this thankfully that i know off . Ive only just my 350z so just learning my ways around . Apparently the clutch fluid should be clear . I just checked mine and its brown in colour . The car done 53k miles . Can i just change the fluid and everything will be good . As ive read some people change/flush it out with new and its brown again after a few thousand miles. . Would i be best to put a braided line on and change the slave cylinder while changing the fluid. And what fluid is best to last long. Thanks

Ive had another go Stock front 225x45x18 Option tyre front 245x40x18 = -1% difference might be stretched with a 9.5 wide Stock rear 245x45x18 Option tyre 265x40x18 = -1.27% difference The 245 might be a stretch on the 9.5 would sooner have them level with the wheel. 2nd size Stock front 225x45x18 Option tyre 255x40x18 = 0.23% difference Stock rear 245x45x18 Option tyre 275x40x18 = -0.07% difference Im not sure if the 275 will stick past the rim and hit the stock rear arch on a 9.5 et20 Whats do you guys think.

Admins apologise ive put this in the wrong section . Should of been in the 350z tyres . Ive put a post in the 350z tyre section now asking the same question . Could you please remove this one from the 370z section . Sorry

Hi guys need some advice been trying the tyre calculators and still none the wiser. Wheels are 18x9.5 et20 all round and after some tyres that will keep the car happy with tcs and anything else. Would i be fine having all the same tyres all round or best stagard. The tyres i came up with on the calculator. Not sure if right. Was 255x40x18 or 265x40x18 all round or would a 265x40 rear and 255x40 front be fine with the tcs etc systems . The car is lowered on tein springs 17mm front 14mm rear . If you guys can let me know will be most appreciated. So i can get some tyres thank you.

Hi guys need some advice been trying to work out tyres on them size calculators site still none the wiser . Wheels 18x9.5 all round What tyres will keep car happy without chucking up tcs and any other things. The car is lowered on tein s springs 17mm front 14mm rear. Would you advise different tyres front to back or keep them all the same. I tried with the size calculator which gave me. 255x40x18 front 265x40x18 rear will this work and keep the car happy or 245x40x18 front and either 255 or 265x40 rear. Could you let me know so i can order some tyres. Thank you

Thank you for the welcomes

Thanks valy im getting new wheels nuts