Lex300

Hi guys will these spacers be fine on standard length studs. And will the wheel still have a hub centre lip to sit on or will it be holding on just by the studs . I might need 5mm for the front wheels to clear the caliper . Just want to make sure it will be safe .thanks

Does this look right with this size tyre . So the car will be happy on.

Payco they are JAV designs.

ZMANALEX what tyres should i run that will not mess up the tcs slip lights that the car will be happy with . I was going to fit front 245/40 rear 265/40 . The car is lowerd down to low im raising it up on some tein s springs 17mm front 14mm rear combo will this be ok

Hi guys i havent a clue when it comes to offset and ive found some wheels they are 18x9.5 et20 all round will these fit without hitting or rubbing the arches and not being stagard .

Hi ive just brought my 350z and its very low on springs its on standard nissan wheels . The rear tyres are a few mm sitting in the back arches on stock 245/45. My questions are i want to rise the car back up not to stock but have enough space for some new 18" wheels i think the car has been dropped 30mm could be more as i dont know what the stock hight is. What would you guys recommend spring wise i was looking at the tein 17mm 14mm set . The other question is not sure if its ok here or in wheels . Im after some borla b1 18" alloys 8.5 front and 9.5 rear with maybe 245/45 front and 265/45 rear as ive read about the tcs with tyre size .could you guys let me know what offset i need as i haven't aclue that will clear the arches no rubbing or hitting .thank you

Thank you for the welcome guys . HEADPHONES thanks mate the 350z is a stock apart from springs 2004 low 53k miles 2 owner clean car. It's not bad for a home made carport the garage got my other car zed in. davey the car not on the road yet mate maybe on the next one .

Hi guys and gals new member my name is alex from Leicestershire just brought my first 350z