Jump to content

Rob350

Regional Event Organiser
  • Posts

    646
  • Joined

  • Last visited

Posts posted by Rob350

  1. Before I fit my o2 spacers I was a bit concerned that the engine wasn't burning right or the cat was dying etc that's why the fault stayed even though I changed sensers and swapped them left to right but I took it to my friendly garage and got an emissions test like on your mot and everything came back fine and as it should so it me feel a bit less concerned about fitting the spacers and kind of hiding the problem I suppose. My guess was it was an electrical fault

  2. 3 hours ago, Silverthorn said:

    New wheels are finally on :wub: I know I say this alot, but I absolutely adore the look of the car now. Its far exceeded my expectations of how it'd look!

     

    So much for this "first year I'll probably just do springs and spacers"... Here we are 10 months later:

     

     

    IMG_20190211_151117.jpg

    IMG_20190211_153201.jpg

    Very non nom B)

    • Thanks 1
  3. 10 hours ago, Bry said:

    S2000 to 350z to E46 m3 to 370z. s2000 was great but bloody unreliable. Loved my 350z , a great all rounder. M3 was epic only sold it to come here to Oz. 370z best looking of the group and joint quickest with m3, just wish the engine had more character .

    That's a fair coincidence, the same cars and in the same order as me haha, you've clearly got good taste :thumbs:

     

    Although I am really eager for a porsche even just for a year then get a 370z. so if money allows I'll get a Cayman s if not a 370 and put porsche dreams on hold.

     

    my s2000 never had issue at all  from 100k to 118k apart from a worn chain tensioner but you could remove the drive worm inside, sand blast it to rough it up again and put back together (a little tip i learnt off another owner, new ones were £270)

    I had 52 reg with hardtop. Id have another one in a heartbeat, brilliant little car and better looking than the gen1 z4 or boxster competitors.

  4. Well So far there's 8 people coming off the bmw m forum in m3/4s and an amg a45 and every time I've done a drive out there's been around 10 zeds so it's looking like there will be around 20 cars for this meet and drive. :teeth:

     

    I'm going to post it on Facebook tommorow as I know there's quite alot of people who don't use the forum as much as fb.

     

    should be a good day out. Nice roads, nice motors.

  5. You can get leather dye will really good results, there's a guy on m3 forum the has just dyed is grey leather interior to cinnamon and it looks amazing, he says it's still soft etc and he just used some letter protector after words to help prolong the colour although because it was dyed it's should stay regardless.

     

    I don't know how you'd get on making black, yellow though

    • Thanks 1
  6. 39 minutes ago, G1en@waxandshine said:

    Stick me provisional down for this Rob. Enjoyed it last year. 

    Be good to see your hill climb car aswell, I only saw it in its mere stock days.

     

    It's also a slightly different route to the one you came on I think, quieter and better roads

  7. SUNDAY 7TH APRIL... MEET AT MITTON HALL, NEAR CLITHEROE, LANCASHIRE

     

    With all this snow it's got me looking forward to drier times and a nice meet and drive out again. The last few times I've done this weve had 10 or more cars with some people traveling an hour or 2 to come along so its always a good turnout.

     

    I'm looking to go on the same route as last time which is an hours drive, stop at a nice cafe then an hours drive back. Theyre quiet roads with a white line all the way full twisys and veiws.

     

    I'm organising it for the first Sunday in april which is the 7th. I thought people that lock their cars up behind bars for winter will be able to blow the dust off them with a nice drive :D

     

    MEETING...

    As usual meet at Mitton hall near clitheroe in lancashire for 9.30am and set off at 10am.

     

    Also when we get back to mitton hall, if people wanted to stay out abit more if they have come a long way, there is another route I can take people on after which is around 1.5 hours start to finish but I'll ask people on the day what they want to do.

     

    Get your name on the list please guys, the more the merrier and get it into your diary. Iv also posted on the bmw M forum as I now own an M3 so there will be a nice array of cars.

     

    Cheers

    Rob

     

     

    20171119_112615.jpg

    20171119_115356.jpg

    • Like 2
  8. You can take the fabric off, but you have to take the seat to bits.

     

    I've been speaking to my mother in law tonight and she's good with a needle and thread, I think we're going to try and just basically wrap some black material over the top and staple and stitch it to the red material, the center cushons come out easy enough so that will hide any staples etc.

    Then in the future if I decide to sell the seat on I can remove the top layer of black fabric and have the original still intact and unworn underneath

     

     

    20190126_155347.jpg

    • Like 1
  9. 20 minutes ago, skate2create said:

    Spray die

     

    Something like above could work, however a change from red to black is pretty dramaticn so would probably take a fair bit to cover. If you look at the reviews, people have done lighter coloured fabric (eg grey) seats to black.

    I saw that stuff, apparently very good but it takes a lot to change colour like there's not much colour dye in the spray. I saw a few vids and it took nearly 3 cans to change a grey pillow to black.

     

    I'm looking more at autobrite or autoglym black dye in a spray bottle. Read that a few people have used it on headliners etc and is pretty good.

     

    Like you say though red to black Is going to be tricky. But even if it goes dark grey it will be better than bright red

  10. I've got a recaro sr3 in red fabric probably out of an old honda. I'd like it to be black...

     

    I've seen dupli colour fabric spray but reviews say it makes the material a bit hard and crispy.

     

    I've also seen black dye that you spray on with water onto the seat and sponge into the fabric then properly clean after a few days to rid any excess dye.

     

    Does anybody have any ideas or solutions on how to make my red seat black??

    Without re upholstering, I want it to be a cheapish project to do myself. I think re upholstering it would cost around £200 if not more

     

    Cheers

  11. Official list time lads :yahoo:.

    1: Irn Bru + 1 - booked

    2: ShaunRS +1 - booked

    3. Rob350 + 1 - booked

    4: TomBorehamUK +1 - Booked

    5: Bigjimg + 1 - booked

    6.Brummiestormer+1 - booked

    7.Miss_Dani350z

    8.Hrma+1

    9. Nugget AKA - Griff - booked

    10. Nugget Jr - booked

    11. Chirag1988 - booked

    12. Sai AKA Serial Vapist - booked

  12. Thinking maybe update the list with who's booked so we know who's Definatly going...

     

    Official list time lads :yahoo:.

    1: Irn Bru + 1

    2: ShaunRS +1

    3. Rob350 + 1 booked/paid

    4: TomBorehamUK +1

    5: Bigjimg + 1

    6.Brummiestormer+1

    7.Miss_Dani350z

    8.Hrma+1

    9. Nugget AKA - Griff ( son has a Z as well, will let him know)

     

    I know there were only a couple of rooms left at each hotel when I booked, Iv ended up staying at a air bnb just up the road on the Saturday stop over.

  13. I had the same on mine randomly, stock exhaust, one day got p0430, cleared came back every few days, switch left and right bank sensors, cleared, still got p0430, got my friendly garage to emission test me and everything was good so I got a o2 sensor spacer and it came back once in about 6months. No performance or mpg was affected before or after so God knows what is was.

×
×
  • Create New...