-
Posts
277 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by scotzman
-
-
10 posts in and still no closer to knowing what you wanted to know...
Oh if only you hadn't left the rubber johnny in the pic.
Was just thinking that myself, luckily i moved her thong out the way.....
- 1
-
I don't think you understand how sex works if you believe that a vagina goes inside a condom
And what if you turn it inside out when finished
-
The rubber part you found under your seat is called a condom. It goes on the end of your penus during sexual relations with woman / men / 350zs if you're that way inclined.
HTH
Now your choosing not to see the whole picture Olly, your only choosing what appeals to you in that pic, the object is in the center of that pic
-
I don't think you understand how sex works if you believe that a vagina goes inside a condom
No No you have it wrong and jumping to conclusions..... F***y = Finny: Definition: "A Girl. Very Outgoing, Hot, Amazing, Smart, Very trustworth"
-
I wouldn't be eating potato products out of a johnny.
you would if there was a F***y in it
-
No idea but why is there a condom in your picture?!
Were you getting ready for something when you took the picture?
Errr its a packet of crisps
-
Hi All, Anyone tell what this rubber part is that i found under my seat,, Thanks
- 1
-
-
You is a lucky man
This is a JDM loom AFAIK
This is a UK GT spec AFAIK - I think the 3rd wire is for steering controls
now the smaller plug on the UK loom is broken but that's the same as the one from the JDM also the larger plug on the UK loom has been butchered a bit could be recovered but it's the same as the big plug from the JDM so between the 2 you should have everything you need......
well add a wiring diagram some solder and a few hours work
PM me your Address I'll stick them in a jiffy bag mate
Thanks for everything chris, i discarded all the wiring as the colours were conflicting with my wiring...used the connectors and found that if you pull out the inner sleeve on the connector just a tad then you can put the pins in and they secure... when all done pushed the sleeve back in then clicked and all now ok... Got it all working, put back the trim, admired my work then found the sat nav gps receiver sitting at the side of me.... but that ok cos im gonna wire in the DVR and rear reverse camera... Thanks again for all your help and you Blackpudding and Haggis is still here...
-
Yeah congrats. Should maybe burn them incase you sell them on to some poor soul
Make me an offer
£1 and you provide shipping. I will make sure these lights never come back to haunt you or anyone else.
Using them for floor lights now
Really ? Can I see a pic
Sorry that would breach my copyright, Patenting, Royalty Management, Licensing, Prototyping
-
The best upgrade on terms of light for 350z is Oem facelift led tail lights.
Nothing beats that. Simple,clean and flashy.
Combine that with LED turn signals what Adrian has now and you have a winning combination for rear end
Sent from my SM-G850F using Tapatalk
Now if you were talking about a lady that was "Simple,clean and flashy " then i woud read your reply twice
- 1
-
I agree with u all..ots also down to personal taste. I'm sort of old fashioned and a traditionalist... but the smoked ones do give a 2 out of 10
-
never, lets face it, the only function our rear lights perform is the brake light. As long as that lights up to a sufficient level there really isn't a problem is there? The amount of cars I see running with a bulb broken and never see them getting stopped and that must be much worse.
I quite like the smoked units as they are a little less blingy than mine. I only bought them as someone else hated them also local(ish) to me, so I thought what the hell.
If you are thinking of getting rid of them then I might be interested in all honesty, i'll give you £2 full double of your previous offer!
As long as u let me pay the postage
- 1
-
I have some! They do bulge but if the rest of the rear end is sharper, then I think it works. But that is why I had the spoiler I did, so that the over hang meets the bulge. Combined with the spats, I think it works...but after all, it is just a taste issue. I too always despised aftermarket lights. The really hateful ones are the round frog eye rears, the make no sense at all
If you are throwing them away, i'll have them as spares!!
PH....They really suit you car, i got the smoked ones, have you had any issues being stopped by the police ?
-
Yeah congrats. Should maybe burn them incase you sell them on to some poor soul
Make me an offer
£1 and you provide shipping. I will make sure these lights never come back to haunt you or anyone else.
Using them for floor lights now
- 1
-
,Looking at your first picture it looks like the JDM loom is the one for you - no steering controls on your Zed?
Received today thanks, also received my Harness adapter for the head unit im putting in, ill pop down the car shortly and count the wires in the car, if there is more or less then ill discconect the pins on the plugs as the Harness adapter i bought was meant to just plug into the adapters then into my HU which allowed me still use the Bose system, would have been a 2 min job... I now have 2 options, the first would be the easiest and thats to put the pins back in ( I checked when removed some tape to see if the wires had been cut but the pins are all still attached) into the original order on the plug, then plug into my harness adapter, but what pins go where on the original plug and surely it depends on the original Clarion unit... ill have a look at the wiring and see if the wiring on the plugs sort of match the colour of wiring on the car.... ill post the updates shortly...
PS: Keyser your def dodging this haggis and black pudding as no address on the package
-
Theres a few wiring guides out there:
http://www.350z-uk.c...his-connection/
Looks a bit complex to me!
Excellent link... wtf now
-
Ill get another couple of pics tomorrow, also there is a further cog below the height adjuster...Thank you for taking time to reply
No probs at all, happy to help As I say though, I'm no expert so just bear that in mind!
It's hard to please Hodaka with headlight pics, I still havent been able to satisfy his exacting standards either
flat carpark, night-time, far enough away, non-coloured/brick wall thats smooth etc
Haha, sorry I'm a bit picky aren't I?
Not at all Hodaka, i appreciate any help.
-
It's hard to please Hodaka with headlight pics, I still havent been able to satisfy his exacting standards either
flat carpark, night-time, far enough away, non-coloured/brick wall thats smooth etc
Your eBay link doesnt seem to work though Scotzman, you have the facelift LEDs but your Item number links to pre-facelift headlights?
Hi Sargara, they are pre-facelift lights according to the site... all u do is put the number 112280174311 in ebay search bar and it will show you the headlights, i was assured by the seller all i have to do is adjust the throw of them.. I will do as you suggested tonight with the lights. Thanks for your time
-
i HAVE SEEN SIMILAR BEFORE ON OCCASION THE ORIGINAL PLASTIC WHITE PLUGS SEEM TO GO BRITTLE AND DISINTIGRATE / CRUMBLE ,I REPAIRED ONE BEFORE BY BUYING A S.O.T LEAD COMONLY USED TO FIT PARROT HANDSFREE KITS SO HAS ALL PLUGS FOR ORIGINAL STEREO ON ,AND SIMPLY USED A RELEASE TOOL FOR THE PINS AND USED THE NEW EMPTY SHELLS ON THE VEHICLE ORIGINAL WIRING SO COST A £15.00 TO GET THE NEW PLASTIC PLUGS BASICALY.
I DID FIND A WIRING PINOUT SOMEWHERE ONLINE THAT IDENTIFIED EACH WIRES LOCATION TO MAKE IT EASY
AMAZING IM SURE HE'LL BE ABLE TO HEAR YOU ON THE FORUM ABOVE ALL THE SHOUTING THAT IS HAPPENING IN THIS VERY LOUD ENVIRONMENT
and breath. Jheez I've seen some wiring fails but that wins hands down. Make sure you cover each join, thats a short circuit waiting to happen
Hi Olly.... checked all the tape, and secured properly various cables... nightmare mate... although there looks more connections than on the harness above... ill count them tomorrow..... Just renewed the clutch, bought the wrong headlamps speedo not workin.. fans not working ect etc it goes on and on trying not to be too down though
-
As Requested... Regards
Hmmm... I'm afraid I can't really tell toooooo much from those, but it looks like you have an insanely intense hot spot. I say this not only because of the output on the wall, but also the light output on the ground. You can clearly see 2 beams, and they're both quite narrow. If that is the case, there isn't much that can be done. It's not due to bulb alignment, but more of the design of the headlight. It actually almost resembles the bad light beam that I showed you in my pic above (bottom of the 2), but slightly better as it doesn't have the circular dark patch.
Also it looks like the passenger side one is aimed very far right. I'd aim that further left if I were you.
Please take all of the above with a pinch of salt. I've been getting into headlights / projectors (weird hobby I know!), but I'm far from an expert!
In terms of pic, a little further back and against a flat wall would be ideal. Kind of like this but without bricks (if possible):
Ill get another couple of pics tomorrow, also there is a further cog below the height adjuster...Thank you for taking time to reply
-
Even if it does pass because you have a hooky tester, it's also bloody dangerous for others on the road who have to stare into your dazzling lights. Have a bit of respect for your fellow drivers, please
I have Respect for everyone and everything... my comment was tongue in cheek... why are your giving me a hard time, maybe my knowledge is lacking but i was only asking for advice/comments...
-
Ill post the MOT pass up in june
Ekona's right though. If your headlights are for LHD the beam pattern will be wrong, which would be a cause for failure. If you look at my pic above, the left hand side of the beam is higher than the right. If your headlight is for LHD, it'll be the exact opposite.
Poop picture as I couldn't be bothered to upload my own, but here's a pic from the MOT guidelines:
Or if you want to take a proper look it's in section 1.8 of this PDF.
Ill post the pics up shortly with lights against the wall and blue spot
Sounds good
As Requested... Regards
-
Looking at your first picture it looks like the JDM loom is the one for you - no steering controls on your Zed?
Thank you so much Keyser... PMin you now
Whats this rubber part
in 350Z General
Posted
Anyway the rubber is obviously used for something, and obviously you guys dont know what its for