mr v6

I think this might be what you're after: https://www.youtube.com/watch?v=P4DBI7Wfd2k

Only thing is, they flash like this every time you brake.

You should have 2 blue wires (I think) on the original car harness, one for the amp turn on & the other is for the power aerial. I connected the amp one up to the amp labelled one (as per your pic), and the other to the power aerial.

https://incartec.co.uk/Nissan/350Z

Go there for your harness & facia adapter, don't forget to select your head unit make so you can have the patch lead to make the steering wheel controls work. In all, it's plug & play apart from remembering to connect up the 2 blue wires for the power aerial & amp switch on.

This may also help if you get stuck, like I did: 

I use Autosmart Duet, comes in a 5L container & costs me about £12 from my AS rep.

I went to these guys last year: https://www.wheelbasealloys.com/

That definitely sounds like the pads have a bit of squeak to them. Mine do this on very rare occasions when they're quite warm & I'm reversing up the drive just as I come to a stop. Nothing I'm going to worry about. How about a disc & pad change, or at least pads?

This place seems pretty popular on the internet, you can customize them: https://www.carmats4u.com/shopbymodel.html/?find=nissan-350z-2003---2008-287514

20 hours ago, HEADPHONES said:

Was it Topgear exhausts in Stockport by any chance?

It was that place, the one in Bredbury.

You were heading towards the motorway on the A6144 around 3.40pm today. I did acknowledge you at the last minute.

Oddly enough, I had a LL exhaust fitted in Manchester, it lasted all of 3 years & underwent 2 repairs before I went to a much better LL franchise in Leeds.

I've read, amongst other topics, these spacers reduce higher rpm or speed?

Spotted today at 1.30pm turning right from Newton Road onto the East Lancs Road... Reg ended ZZZ.

I machined mine over the weekend, last time I did them was Feb 2019. I used my DAS6 with Autosmart Evo, 2 passes then 2 coats of Fusso99 light wax. 

Headphones, you can't be too far away from me in Manchester, so if you want to take a look at them just let me know.

Did the UK Z come with these fobs I've seen around the internet: https://www.amazon.co.uk/2003-2006-Nissan-Keyless-Remote-BestKeys/dp/B00684TD6O

Worth having or not?

Maybe they're more worried about snapping a bleed valve off & giving themselves a headache?

Don't these have a cone that can either stick in the arm or on the ball joint? Easily missed if you're not expecting to see it.

Parked up outside Pete Ramsey Autos at 3.30pm today. Clear bumper reflectors & those GT4 alloys in a charcoal colour.

Around 5.55pm tonight passed me down Moss Lane, turned into the shopping centre car park.. Reg was X15 EJT...

Anyone on here?

Apparently the built in module doesn't support bluetooth 4 & above.

I too got confused with all these leads, but after a couple of emails to Incartec I ended up buying the 3 cables & single DIN facia for about £70.

Thanks Alex for doing that for me, but I'm sure that's for the engine with 2 throttle bodies, given the cut out on the top half on each side, also the top 2 fixing holes are in different locations.

@Napp: Was your cover fitted to a Z or the 350GT?

Did you open the hydraulic system, as in change the slave cylinder or CSC, depending on your setup?

Spotted heading out of Northwich towards the A556 about 7.45am this morning. Reg very similar to mine, EA05 WEB

Thanks Alex, would you mind checking for me when you get a minute please? Do you know if it fits under the strut brace? Are you able to try, also let me know the cost delivered to UK mainland if it does fit.

Thanks.

I've had a look around for the answer to this & can't get a definite answer. I've never been keen on the Z's half sized engine cover. Given as the 350GT is the same earlier engine, they seem to come in a few variations. Question is, do they fit under the strut brace without any issues?

If they do, I'm looking at the black / grey one with the red V6 on..